Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: May 13, 2026
Thing is it is one of those intermittent things. Yes I could fix the gauge somehow to the hot tap in the bathroom about level with the tank I could fi...
@cathoderay Thanks for confirming. When I looked closely I thought I had seen one before somewhere in my shed, rescued after the clubhouse renovation!...
@radwhisperer Thanks but that is definitely not a mixer valve as my water temp is low and there is no feed to hot water just the base of the DHW cylin...
I don't seem to have a mixer valve. Just pressure regulator.
@radwhisperer It does seem to occur most loudly the morning after the legionnaires cycle, so that could be it.
@radwhisperer Thanks I don't think I need to change mine but I will have a look out of interest. Since going to LWT I had noticed the water flow at ti...
@radwhisperer That is interesting. Can you tell me where you found that setting on the MMI please?
Seems to be settling better now I'll leave it alone
@toodles I have electric pet blankets 🙄 If required.
@toodles I had thought to go with Havenwise and their 6 month trial, unfortunately they have not got the OK from Daikin yet and the trial is only 3 mo...
@terry1812 Interesting it is a bit like a PID controller which reduces power input as the target temp is approached to avoid overshoot I used to use o...
@jamespa OK I have found that setting and reduced by 1C and see how that goes.
Latest Posts
-
RE: A2A vs A2W: Which Heat Pump Would You Pick?
Good questions @temperature_gradient. My understanding ...
By springswood , 1 hour ago
-
RE: Estimating true heat loss from twelve months of consumption data
Thank you both for your replies. It is heartening to di...
By ian33a , 2 hours ago
-
RE: Anyone concerned about GivEnergy?
@sunnyskies I agree with Downfield trying to ask the GE...
By Judith , 10 hours ago
-
RE: Setback savings - fact or fiction?
@jamespa — this version may be marginally better: &nb...
By cathodeRay , 12 hours ago
-
RE: New Vaillant aroTherm Plus in black - When will it come to the UK?
All going according to plan, mid July we get that 7kW a...
By Batpred , 12 hours ago
-
Current metrics - DHW target set to 47c
By TaffontheTaff , 17 hours ago
-
RE: My Grant R290 9kW Heat Pump Installation
@petch I'm very sorry that I have not picked up your po...
By GrahamF , 19 hours ago
-
RE: Samsung gen 7 HP 12kw - auto control issue and water law
Suggest you have a trial with Havenwise app. I have th...
By Broadsman , 21 hours ago
-
RE: New Solar, Batteries, Air Source and Under Floor Heating advice please
You’re right: UFH works best with high-conductivity fin...
By bafab , 1 day ago
-
RE: DIY or Don’t Touch? Solarman Smart Meter Install
That was my understanding also.
By JamesPa , 1 day ago
-
RE: Grant Aeona 3 R32 cycling with weather compensation.
That would be abnormal but I cant see from your charts ...
By JamesPa , 1 day ago
-
RE: Vaillant Sensocomfort Time
Oh I remember this from when I set mine up 2 years ago,...
By JamesPa , 1 day ago
-
Heat geek have already stated that the pro is in fact c...
By JamesPa , 1 day ago
-
RE: The Myth of the MCS Performance Guarantee
@editor I know. As if MCS wasn't bad enough, it's now e...
By Deltona , 1 day ago
