[Sticky] Home energy storage & battery register
Much like our ASHP roll call, I’d like to start a list of homeowners with battery and energy storage solutions. If you have a battery, please leave the specifics in a reply, and I’ll update this list.
FOGSTAR
15kWh Seplos Mason – @hughf
2 x Seplos 14.3k kWh – @misterb
GIVENERGY
3 x 8.2kWh GivEnergy – @tim441
GROWATT
6kWh Growatt – @majordennisbloodnok
HANCHU ESS
10 kWh Greenlinx LFP – @skd
SOLAX
4.5 kWh Solax battery – @steve81uk
2x Solax 3kw batteries (Inverter Solax x1-Hybrid-G4) - @eqwilts
TESLA
2 x 13.5 kWh Powerwalls – @toodles
REPURPOSED CAR BATTERIES
Nissan Leaf (16kWh) – @kenbone
Get a copy of The Ultimate Guide to Heat Pumps
Subscribe and follow our YouTube channel!
2 x 13.5 kWh Tesla Powerwall units with Gateway. Regards, Toodles
Toodles, heats his home with cold draughts and cooks food with magnets.
1 x 6kWh Growatt battery via a Growatt SPH5000 inverter.
105 m2 bungalow in South East England
Mitsubishi Ecodan 8.5 kW air source heat pump
18 x 360W solar panels
1 x 6 kW GroWatt battery and SPH5000 inverter
1 x Myenergi Zappi
1 x VW ID3
Raised beds for home-grown veg and chickens for eggs
"Semper in excretia; sumus solum profundum variat"
1 x Seplos 14.3kWh (Seplos box from Alibaba, battery cells from Fogstar)
1 x Solis 3.0kW RAI-3K-48ES-5G
Hanchu ESS - Home-ESS-LV9.4K (9.4kWh)
“Anything worth doing, is worth doing right.”
GivEnergy 9.5kWh with AC3 inverter
2kW + Growatt & 4kW +Sunnyboy PV on south-facing roof Solar thermal. 9.5kWh Givenergy battery with AC3. MVHR. Vaillant 7kW ASHP (very pleased with it) open system operating on WC
ESS Smile G3 10.1 battery (awaiting a second to be installed).
ESS Smile G3 5kw inverter.
Retrofitted 11.2kw Mitsubishi Ecodan to new radiators commissioned November 2021.
14 x 500w Monocrystalline solar panels.
2 ESS Smile G3 10.1 batteries.
ESS Smile G3 5kw inverter.
- 26 Forums
- 2,378 Topics
- 53.9 K Posts
- 176 Online
- 6,060 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Radiator sizing sanity check
No chance! Largely, hence my suggestion to do some...
By JamesPa , 5 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
As it turns out this is correct! All I needed to do was...
By benson , 6 hours ago
-
Here is an update of the setback we operate on our syst...
By SUNandAIR , 8 hours ago
-
RE: Grant ASHP 17.5 kw. weather curve
@chinkoa Sorry there are two separate thoug...
By JamesPa , 9 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@transparent As easy as putting sparklers in champag...
By Papahuhu , 9 hours ago
-
@f1p Looks good, and will likely be something I use whe...
By Sheriff Fatman , 12 hours ago
-
RE: Cascade 2x Grant Areona 10kw ASHP - Ongoing setup issues
Either complete Bow Locks or at best a marginal effect....
By JamesPa , 15 hours ago
-
Hi all I’m looking to get some insight on what others...
By Renewables345 , 15 hours ago
-
RE: The Great British Heat Pump Owner Persona Survey: Let's Build Our Archetype!
@mosibi, go on then, complete the survey. Let's get the...
By Mars , 15 hours ago
-
RE: Water Hammer After Heat Pump Install
@jaynieq I wish you luck with this one. I think the ma...
By JamesPa , 17 hours ago
-
RE: Optimum new build house design for Heat Pump
From first principles I would say: Definitel...
By JamesPa , 1 day ago
-
RE: Weather compensation- why you should use it
As good a place as any to drop this video:/p>
By Mars , 2 days ago
-
RE: Forum updates, announcements & issues
@transparent D'Oh - I did look before I posted but I mi...
By dr_dongle , 2 days ago
-
Compatibility with Samsung AE080RXYDEH
I am new to all this. We have a SamsungAE080RXYDEH that...
By John999 , 2 days ago
-
RE: New Fogstar 15.5kWh upright solution
@batpred Maybe you should buy your additional batter...
By Bash , 2 days ago
-
RE: Data Accuracy Problem: Daikin 8kW Heat Pump's Onecta App vs MMI Power Consumption
@nursethescreens Yes, comfort and happiness of the fami...
By Toodles , 2 days ago
-
RE: Connecting Growatt SPH5000 over wired ethernet rather than wireless
Thanks folks. I had tried googling an ethernet lab adap...
By z8lccda , 2 days ago
-
RE: Changing from 4-port buffer to volumizer
@toodles I'm not concerned that the behaviour is not no...
By Andy1618 , 2 days ago
-
-
RE: Setback savings - fact or fiction?
I agree, and I think there are two things in play here....
By cathodeRay , 2 days ago



