Last seen: Jan 10, 2026
Just a thought...is the Algarve not a no brainer for solar thermal?
Off topic alert More pedantically, Augusta King and her Note G while called an algorithm sought to performs actions more diverse than Babbage's earli...
I too have a well, but this one is a c1500 drystane well around 30 feet deep. It is fed via underground stone drains over a considerable area. It hol...
Meh.....Scotland remembers Britoil. Same plan, new name.
Before Mitsubishi will accept the system into the 3 diamond service package they require an engineers visit and full system check, presumably to ensur...
The full nuts to soup, 3 Diamond Mitsubishi service package is now £456 annually. It covers heat pump, cylinder and controls, annual service with comp...
Aye Mitsi! They have had a manufacturing plant at Livingston since the early 1990s, originally doing AirCon then also Heatpumps. New training centre ...
Wot he said! The installer laid out the various options in terms of make and his reasons for or against each. Ultimately it came down to the best to...
Because Arquiva have met their contractual obligation with 99.25% population coverage and the geographical rest is in the - To bad, So sad, Never min...
Perhaps they might concentrate on delivering a working smart meter system first.
Agh..okay Does your unit have the secondary filter indicated in the manual? It seems to be an activated charcoal mesh sandwich.
- 26 Forums
- 2,396 Topics
- 54.3 K Posts
- 910 Online
- 6,077 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Recommended home battery inverters + regulatory matters - help requested
Thanks for the clarification.
By JamesPa , 21 minutes ago
-
RE: Considering MLCP (Multi-Layer Composite Pipe) for ASHP
OK, TBH I dont know enough about MLCP to comment with a...
By JamesPa , 34 minutes ago
-
RE: Predicted Heat Loss from MCS calcs vs EPC vs actual
My gut feeling is that the heat pump is right sized. ...
By Tim441 , 55 minutes ago
-
RE: Heat pump not reaching flow temperature
Peak Energy Products most recent accounts (to June 2024...
By JamesPa , 1 hour ago
-
RE: Power outages and storms: A surprisingly good DNO experience
Agreed, which is no more nor less than a customer shoul...
By Majordennisbloodnok , 2 hours ago
-
RE: Running from backup generaor in powercut?
@batpred In our case, 3 times each day when the Octopus...
By Toodles , 3 hours ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
Hi @sheriff-fatman Cycling at 5C and below is usuall...
By RobS , 3 hours ago
-
RE: New Fogstar 15.5kWh upright solution
@batpred Here's the latest Fogstar ready built pack....
By Bash , 5 hours ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
@mike-patrick yes, even though the current system is ru...
By Tim441 , 5 hours ago
-
RE: Solis inverters S6-EH1P: pros and cons and battery options
Solis confirmed that the S6 works with a single battery...
By Batpred , 5 hours ago
-
RE: Who has a V2G EV installation
I am wondering if in any V2X, would the car battery eve...
By Batpred , 6 hours ago
-
RE: Setback savings - fact or fiction?
Yes, by calculating it manually from the minute data, w...
By cathodeRay , 7 hours ago
-
Fan unit Making terrible noise HELP!!
One of a pair of fan units on an Earth Save Classic II ...
By GutoFfowc , 8 hours ago
-
RE: New Mitsubishi Ecodan 11.2kW installation - L9 errors and maybe more
OK. I think your system, which seems well designed, is...
By JamesPa , 10 hours ago
-
RE: Heatpunk Floor plan issues
It's usually the complete opposite... seldom that Safar...
By Mars , 23 hours ago
-
RE: Fan is clipping ice build up from the front of unit.
@majordennisbloodnok I’ll not go there thanks! Toodles.
By Toodles , 1 day ago
-
RE: Running my new Nibe ASHP efficiently
I'm new to the forum. Did you get a reply to this last ...
By Mike @ Camelot , 1 day ago
-
RE: ASHP Energy Consumption: Aira 12kW heat pump
@grantmethestrength MCS requirements for DHW capacity h...
By Toodles , 1 day ago
-
RE: Help me keep the faith with my air source heat pump installation
@adamk I'm observing my own system at low temperatures ...
By dr_dongle , 1 day ago


