Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 24, 2026
It might well be a quirk of the Chofu unit in that it is less able at lower temperatures. My 2019 Ecodan was sold to me on the grounds that it was des...
Best of luck, oh and use MelCloud once you have connected the wireless receiver to the FTC, then you will never have to touch the main controller agai...
No. Auto adapt is a feature of the FTC5 too. I don't really know how else to say this. The wireless adapter frees you from having to play with the ma...
Perhaps Mars can shed some light on what he was talking about. I fail to see how a Mitsubishi device integrated with the Mitsubishi FTC as intended ca...
Yes, I found none. I followed the Mitsubishi installation directions from their site and I found it quite straight forward.
a senior engineer strongly indicated that he was putting the best interests of Britain ahead of a future network planning strategy. ....and precise...
We keep using this word "independent" when referring to NESO. The Chair and CEO are appointed by the Government and regulated by OFGEM (another gover...
DHW temp loss is not at steep as 1C per hour. Overnight starting from 50C I usually see a 8C drop over about 12 hours.
That seems similar to that which I see on my system. The >60 flow temp is only sustained for around 15 mins before dropping steadily downwards. 14k...
Oh boy...you have really kicked the hornets nest! Not being able to receive a smart meter signal I have crunched the numbers, rather crudely compa...
Yes, you need the PAR-WT50 controller which speaks to the FTC5 via the PAR-WT51 receiver which is wire connected to the FTC5. You need both for this t...
If you use auto adapt and the Melcloud scheduling you can vary the target temperature across any period. I use it to set back for around 6 hours overn...
SPONSORS
Degrees of Separation
Latest Posts
-
@toodles possibly. The £9k labour charge for 4-5 days w...
By AndrewJ , 4 hours ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 8 hours ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 21 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Swings and Roundabouts, you win some…. ...
By Toodles , 21 hours ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 1 day ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 1 day ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
There is scope for product development here. I for one...
By JamesPa , 1 day ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 2 days ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 5 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 5 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 5 days ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 6 days ago
SPONSORS
