Last seen: Jan 6, 2026
@majordennisbloodnok The frames alone weigh over 100 kilos, then there is the weight of the ballast blocks and the panels themselves - maximum height ...
@papahuhu I read the planning requirements very carefully and took advice. The wording refers to ‘Ground Mounted’ whereas my panels are resting on but...
@papahuhu I am able to reach / access 12 of my 21 panels as 10 are ground mounted and 2 on a low roof; the rest have to make do with rainfall! Toodles...
@papahuhu I’ve heard that some systems are beginning to use drones to clean panels - a water supply tube is fitted to the drone and I assume that wate...
@dr_dongle There is no such thing as ‘Too Much Information’ on this subject; a dedicated forum sounds like a good idea to me. Toodles.
@nursethescreens Yes, comfort and happiness of the family (and particularly for SWMBO!) is the secret to a contented existence - even if it is at the ...
@tim441 I have just realised that I omitted the December 2022 graph (Though 2023 was still my first full year of solar power production) The total for...
The data accuracy of the Daikin MMI is somewhat iffy to say the least; Jonathan Tracey produced a Youtube presentation on the subject, he has a Shelle...
@andy1618 If this is of any interest / help, my Daikin EDLA08 8 kW monobloc will start a run with a flow rate of ~28 lpm. Within a minute or two, this...
@cathoderay Perhaps a gnarly old hand emerges from under the display and gives a sharp tap to the owner’s fingers along with a remonstrative shout of ...
@andy1618ndris In December 2023 (my first December reading) the yield Then December 2024 yield was lower… But, this December was the best ye...
@papahuhu 😟 Toodles.
- 26 Forums
- 2,391 Topics
- 54.2 K Posts
- 256 Online
- 6,074 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Recommended home battery inverters + regulatory matters - help requested
James asked: "Can anyone outline (or point me at) the...
By Transparent , 41 seconds ago
-
RE: Heat pump not reaching flow temperature
@johnd, what you’re experiencing is common with air sou...
By Mars , 9 minutes ago
-
RE: Gen 6 Samsung ASHP losing 20C of DHW in 60 min directly after generation
@ecobaker Thanks for this. I've had it in both slots. ...
By andbeck , 12 minutes ago
-
RE: Air source heat pump circuit not operational
Welcome to the forums. If the thermostat shows it’s c...
By Mars , 22 minutes ago
-
RE: Daikin Atherma ASHP Cycling 6 Times an Hour?
From what you describe, it sounds like you’ve done a so...
By Mars , 28 minutes ago
-
RE: New Fogstar 15.5kWh upright solution
Of course it is not helpful to frogstar fan club member...
By Batpred , 2 hours ago
-
RE: Ecodan with FTC7 - True Weather Compensation
@danwright90 I've linked two videos below recorded this...
By Sheriff Fatman , 3 hours ago
-
@steelbadger, I’ve pretty much decided now that there’s...
By Majordennisbloodnok , 3 hours ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
That makes plenty of sense. Perhaps more importantly, O...
By Majordennisbloodnok , 5 hours ago
-
RE: ASHP Energy Consumption: Aira 12kW heat pump
@downfield Likewise we are also retired and want a warm...
By Wally , 7 hours ago
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
It does but it almost all applies to boiler systems and...
By JamesPa , 8 hours ago
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
So theres a problem for starters. This means that the ...
By JamesPa , 8 hours ago
-
RE: Insulating a pitched roof with kingspan, has anyone done it?
Thank you everyone for all of the information, it looks...
By TRBob , 1 day ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@transparent Yep, they didn’t even mention it. When ...
By Papahuhu , 1 day ago
-
RE: Setback savings - fact or fiction?
They are lovely, and I feel lucky to live in one, but t...
By cathodeRay , 1 day ago
-
RE: Who's your electricity provider and what's your tariff?
Worth adding that, for this tariff, the Octopus app has...
By Batpred , 1 day ago
-
RE: APP for remote Daikin ASHP Operation
Thanks, @newhouse87. Understood. I was only asking on...
By Majordennisbloodnok , 1 day ago
-
@mike-patrick A propos, I think my heat pump generates ...
By dr_dongle , 1 day ago
-
RE: Mitsu Zubadan flow temperature issue
Update: The flow temperature has now stabilized at 60C ...
By bontwoody , 1 day ago
