Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
Part of the FIT agreement states that any changes to the system must be declared and approved. Since the FIT scheme stopped taking new applicants quit...
You are more than welcome. I prefer to work through problems in a systematic and logical manner, particularly when the person seeking help is new to ...
@myanthony It would appear that Hugh wishes to help, so rather than have too many 'cooks', I will leave you in his capable hands. Best of luck in ...
There would appear to be two electrically operated valves, is that correct? Does the flow pipe from the heat pump connect between these two valves?
@myanthony The pipe with the isolation valve with the blue handle, to what equipment does the pipe connect?
@myanthony The 'Y' strainer is not that large and could have been lagged over. If you feel along the insulation for any bumps, or if you find anythi...
@myanthony The 'Y' strainer should be in the return pipework probably just through the wall inside your home.
@myanthony Looking at the photos I was surprised to see that it has been mounted on wall brackets, which does not comply with the manufacturers inst...
@myanthony According to the manual a 'Y' strainer should have been installed, probably in the return pipework back to the heat pump. If you are not ...
Are you intending to help, in which case I will leave it to you to resolve the problems?
@myanthony Do you have a copy of the manual HughF posted? If so, could you provide a photo of the main screen display as shown on page 10 of the man...
Could you please provide some photo's of the equipment inside your home?
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 7 hours ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
Sooooo, what did we do in the end? We approached three ...
By Penval , 7 hours ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
D'oh - of course. I shouldn't post before my brain is f...
By Old_Scientist , 13 hours ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 14 hours ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 15 hours ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 16 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 1 day ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 1 day ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 2 days ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 3 days ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 3 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 4 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 4 days ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 4 days ago
SPONSORS
