Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
@morgan Hi Morgan, It is difficult to say for definite, not being there and able to interrogate the controller. From the photo's it would appea...
@kev-m Hi Kev, I suspect that you are correct that auto adaptation would not work successfully with your present system. If you were to switch it...
@markc Hi Mark, It would be interesting to see the corresponding temperature graphs to go with your consumption and COP data.
@markc That is fine Mark, whatever suits you best.
Good Morning Mark, Could you please provide data over a longer period, from before you resolved the problem, so that other forum users can see how a...
Hi KundK, The first thing that I would suggest is getting more quotes, and ask for them to be as detailed as possible. As you are using electric s...
@markc Evening Mark, I have been reading a little deeper through the manual for the FTC5 controller and I do believe that you should be able to u...
Hi Jeff, I think it may be a freudian slip. I do believe Brendon's statement should read ' 20% to 30% of the gas consumption figure', which of cours...
Hi Nick, Welcome to the forum. As a very rough, ballpark figure, you could probably expect electrical energy consumption to be 1/4 that of your ga...
@markc Thanks Mark, You will no doubt find that to be useful for fault finding and also for optimising the operation of your system.
Mark, A quick question, how did you produce the graphs? Were they derived from your Ecodan controller?
@markc Mark, It is always a good feeling when you solve the problem and fix it yourself. Once you are certain that the valve problem is resolve...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: The good, the bad and the not that great – my heat pump installation
@jamespa Thank you sir the help and talking on here was...
By Burtis , 5 hours ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 5 hours ago
-
At the risk of going on: A slight side issue for a foru...
By Bart , 11 hours ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 12 hours ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 1 day ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@lizzie Thank you, very interesting and useful informat...
By Toodles , 1 day ago
-
RE: PV and battery long payback - sense check query
@jamespa I was just commenting on the speed, not sug...
By Batpred , 1 day ago
-
Readers here please note that Derril Water and many oth...
By Transparent , 1 day ago
-
RE: Advice on Vaillant Sensocomfort
Oops, I meant Sensocomfort (the UI to the controls)
By Batpred , 1 day ago
-
RE: Heat Pump Training vs. Real-World Installation
Our instal was very much the opposite. White haired blo...
By Batpred , 1 day ago
-
RE: Flushing system, cleaning and inhibitor
While skim reading a manual for our Vaillant HW tank, I...
By Batpred , 1 day ago
-
RE: 'Chinese Diesel Heater' to heat the home .....
Old thread but I'm new to the forum so new to me. How...
By BlizzardGreen , 2 days ago
-
I'm not sure why you would want to make it more difficu...
By JamesPa , 2 days ago
SPONSORS
