Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
@morgan Try pairing it with the thermostat again and see if any LED's light during the process.
@morgan Do the 3 LED's on the front of the receiver change when you raise and lower the setting of the thermostat?
@morgan Where does the receiver for your wireless thermostat connect?
Morgan, On the FTC6 controller there are 4 buttons below the screen, which are F1 to F4, from left to right. Below the 'F' buttons are 4 further but...
Okay, I will write some instructions which you can try, but it would be much better to get direct feedback.
Morgan, The graph symbol does indicate that your system is in weather compensation mode. If you would like to give me a call I will explain how to c...
Okay Morgan, got that. What manufacture is the thermostat? Is it wired or wireless?
Hi Mars, Sounds like you have air in your system, make sure the air relief valves are not full closed.
Hi Morgan, The fact that the flame signal came on at the controller indicates that the controller is getting the correct input from the thermostat. ...
@markc The actual air temperature is just one factor, solar gain, not just through the windows, but on the building fabric itself can have a marked...
@markc Hi Mark, The difference in heating energy used (as shown by the graphs) is easily explained, in the first case with the water flow tempera...
@morgan One easy thing that you can check is if the thermostat action has been reversed in the controller. With your system running, increase the...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: The good, the bad and the not that great – my heat pump installation
@jamespa Thank you sir the help and talking on here was...
By Burtis , 4 hours ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 4 hours ago
-
At the risk of going on: A slight side issue for a foru...
By Bart , 10 hours ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 11 hours ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 1 day ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@lizzie Thank you, very interesting and useful informat...
By Toodles , 1 day ago
-
RE: PV and battery long payback - sense check query
@jamespa I was just commenting on the speed, not sug...
By Batpred , 1 day ago
-
Readers here please note that Derril Water and many oth...
By Transparent , 1 day ago
-
RE: Advice on Vaillant Sensocomfort
Oops, I meant Sensocomfort (the UI to the controls)
By Batpred , 1 day ago
-
RE: Heat Pump Training vs. Real-World Installation
Our instal was very much the opposite. White haired blo...
By Batpred , 1 day ago
-
RE: Flushing system, cleaning and inhibitor
While skim reading a manual for our Vaillant HW tank, I...
By Batpred , 1 day ago
-
RE: 'Chinese Diesel Heater' to heat the home .....
Old thread but I'm new to the forum so new to me. How...
By BlizzardGreen , 2 days ago
-
I'm not sure why you would want to make it more difficu...
By JamesPa , 2 days ago
SPONSORS
