Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 20, 2026
The tab shows after a few secs. I tried to reach them including with the chat. It would be useful to get some info on the survey and focus group. ...
Clearly my assumption was you did not have a CU dedicated to the Powerwall! One would hope that installers dealing with expensive kit would be bette...
I agree, the article is naive in many respects. Which? should be more careful when encouraging people to do the right thing..
I am not familiar with the powerwall inverter but when converting to DC it may cause some DC currents to flow upstream like other inverters. Difficult...
My octopus agile export rate has minimum pay of 10p/kwh, including overnight (when I can buy at 3.5). Shame that the meter offsets consumption and pro...
True that the we are not investing enough in the young.. On the pensions that retired people get and do not need, if they would be channeled to the yo...
You had mentioned that they told you they would upgrade the cable at some point, but not very soon?
My charger was quite picky about the lower threshold. I contacted Ohme and they set it as low as G99 allows. I have not seen it tripping on the higher...
At the moment, we rely on blinds/curtains. I am looking forward to get the heatpump to cool. Perhaps run it as cold as possible in the large rad (in...
I understand that MCS are having to wait for another body to create some certification so that they can then accredit it. I agree though with other...
I would expect most topics can be governed at central government level. If there is some real difference due to local requirements, one option would b...
Thanks, do you have a source. I am curious regarding differences in sizing and weights. In which ways are the railways that China built different from...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 1 hour ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Swings and Roundabouts, you win some…. ...
By Toodles , 1 hour ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 9 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 10 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
There is scope for product development here. I for one...
By JamesPa , 12 hours ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 1 day ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 4 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 4 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 4 days ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 5 days ago
-
RE: PV and battery long payback - sense check query
@jamespa I was just commenting on the speed, not sug...
By Batpred , 5 days ago
-
Readers here please note that Derril Water and many oth...
By Transparent , 5 days ago
SPONSORS
