Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jun 13, 2026
The Cosys are/should be capable of heating the tank of water to over 50c, including doing a legionella cycle if you want it. If it's heating a full t...
In fairness, I would find those temperatures too cold and uncomfortable. One of the differences might be related to thermal mass:all our walls are pl...
It’s been consistently warm over the last couple of days and I’ve found temperatures in the house have dropped off a bit. The landing is 22.4c and I ...
@razz they told me that as well, but they don’t live in my house and the primary pod in the hallway leads to the problem that I explained. Putting it ...
@razz the problem you are experiencing is because Octopus like you to run the heat pump thermostatically. Essentially, the whole house is being heate...
@agentgeorge Probably, but temperature change at -10 has little effect without a warm weather change as well. It just flattens the curve out: I haven...
@kevh So it does... maybe they are listening to people.
Press and hold until the light turns blue, not flashing. Then open your phone/tablet settings and look for the cosy hub wifi and connect to that. Na...
See my graph in response to @kevh. It may be possible in the hub to set a temp lower than -10c, I've not tried, but the returns really diminish alter...
I feel sorry for those people who have it installed under default commissioning or minimum setup, which seems to be the norm not just for Octopus, as ...
In the app, the minimum you can set it to is 50c but that may just flat-line the curve from the 50c point set in the hub to the -10C OAT mark. What y...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Electricity price predictions
Chinese manufacturing has the ability to be very good q...
By Majordennisbloodnok , 3 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Forum Handle: GotGordon Manufacturer: Samsun...
By Gotgordon , 14 hours ago
-
RE: Summer heat is becoming the new winter cold in the UK. What are you doing about it?
@ian33a I am not easy with sleep either unfortunately…....
By MK4 , 15 hours ago
-
RE: Renewables uptake near you
In a village of under 40 houses...Conservation Area. I'...
By Tim441 , 1 day ago
-
RE: Home Alone with Home Assistant (previously A Beginner's Guide to ASHP Monitoring)
Great news, @bontwoody.
By Majordennisbloodnok , 1 day ago
-
Haier R290 Super Aqua Monobloc. Output capacity tables.
As I mentioned in my introduction post, I've been consi...
By Singlespeed , 1 day ago
-
RE: Air to air bus grant installer anywhere
I am consistently told by aircon folks (ie air/air) tha...
By EtchedPixels , 2 days ago
-
RE: What is possible with FIT, SEG, Hate Pumps and Batteries?
Thank you, everyone, for your replies. Our FIT provid...
By ian33a , 2 days ago
-
@mk4 And of course, the panels are less productive due ...
By Toodles , 2 days ago
-
RE: GivEnergy inverter tripping due to over-voltage?
I'm trying to get clarity on exactly when the inverter ...
By Tim441 , 2 days ago
-
RE: Samsung Heat Pump – Can't Activate TW2 Pipe Sensor (for Delta T Control)
Autocorrupt seems to be working overtime.
By Majordennisbloodnok , 2 days ago
-
RE: Vehicle-to-Home with a Heat Pump: Is the Technology Ready and Which EV Should I Buy?
I looked into that wallbox a bit more off the back of t...
By Majordennisbloodnok , 3 days ago
-
RE: Say hello and introduce yourself
@jandp awesome system I hope it works out well.
By Judith , 3 days ago
-
RE: Surface mount or bury primaries for heat pump installation?
@bobflux That's the stuff. The installer recommended tw...
By tomasmcguinness , 5 days ago
SPONSORS
