Recent Posts

| Forums | Topics

Page 23 / 137 Prev Next

Posts with their shortened content
	RE: Heat pump not reaching flow temperature By DaveC, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	@johnd do you also have a plastic container to catch any of the glycol overflow if it ever over pressures? Attachment : IMG_0105.jpeg
	RE: Advice for a novice on Mitsubishi Ecodan 6kW By RobS, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	Hi @sheriff-fatman Cycling at 5C and below is usually defrosts. The other cause can also be an internal thermostat cycling the heat pump due to the WC curve being too high. How often have you seen a...
	RE: Heat pump not reaching flow temperature By DaveC, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	Hi @johnd Yes we had the defrost timer extended but we have still had to have the immersion heater on as well otherwise the ASHP isn’t able to reach or maintain the flow temperature when the external...
	RE: Heat pump not reaching flow temperature By johnd, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	@davec This is interesting, I only have the 223344 code, I assumed was full access. Are you able to see the defrost cycle interval parameters with the higher access?
	RE: Heat pump not reaching flow temperature By johnd, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	@davec Sounds like we are in the same boat. Did the installer extend the defrost intervals (default is 45 mins according to the installer)? This seems to have made a big difference, instead of loopin...
	RE: Recommended home battery inverters + regulatory matters - help requested By Batpred, 3 days ago Forum Energy Storage
	The diagram describes what happens inside the Solis. All these relays are electronically controlled by the firmware it runs. By bonding I understand that there is another internal circuit that connec...
	RE: Heat pump not reaching flow temperature By DaveC, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	@jamespa there are a couple of parameter menu levels, only accessible if you know the correct access codes to get to them; level 1, level 2 and factory. (which we do) I can throw up screenshots of eac...
	RE: Heat pump not reaching flow temperature By DaveC, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	Thanks @jamespa Yes we are running the heating 24x7, outside of 2x 1 hour intervals to do the DHW set 12 hours apart to try and reduce heat loss in the house. The internal temperature monitoring appr...
	RE: Heat pump not reaching flow temperature By JamesPa, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	Firstly welcome to the forum. From the preceding posts on this thread you may have gathered that this unit appears not to 'expose' the key parameters in the weather compensation curve. Without that, ...
	RE: New Fogstar 15.5kWh upright solution By Bash, 3 days ago Forum Energy Storage
	@batpred Here's the latest Fogstar ready built pack. £1849 (although has been cheaper and will likely be cheaper at some point when they have their next sale/discount code). It's the same Seplos V3 B...
	RE: RDSAP10 effect on existing heat pump EPC rating? By Tim441, 3 days ago Forum Government Schemes, Regulations, Training, Planning & Organisations
	@mike-patrick yes, even though the current system is rubbish i got my EPCs updated in part with expectation of England adopting the new UK Home Energy Model (HEM)... which will reduce validity to 5 ye...
	RE: New Fogstar 15.5kWh upright solution By Batpred, 3 days ago Forum Energy Storage
	Clearly, we have to be very careful with comparisons. It is up to each individual or company to decide on what they see as comparable. Having said that, @transparent ´s post above outlines key aspect...