Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 4, 2026
@majordennisbloodnok Man, you’re the best!
@majordennisbloodnok Might that be an e-Raspberry Pi?
@transparent You risk getting the sack for comments like that!
@majordennisbloodnok Would that get us back to current affairs? Perhaps this is something others would discuss in bars but don’t feel I am putting you...
@trebor12345 Try opening the settings window and then ‘Operational Mode’, at the moment, you are set on ‘Savings’ - swap over to ‘Self-Powered’ mode w...
@trebor12345 On the home screen of the Tesla app, select the ‘Energy’ option under the picture of the house. You will then have four options, Home, Po...
Are you exporting the solar energy your panels produce? Is your PW set to export from the battery? Regards, Toodles.
@peterackstraw 13.5 kWh’s of battery capacity is unlikely to ‘see the day out’ even with any solar energy contribution. Once the battery and solar con...
@jamespa A cynical view but, I fear that it is a fair summary….. unfortunately. Regards, Toodles.
Something sounds odd there; if you have solar power charging the PW3 and minimal consumption, the battery ought to charge to (and hold) a full charge ...
@peterackstraw A few observations rather than a recommendation for a particular tariff. As you are using a Tesla PW2, I would assume you may have had ...
@transparent I’ve heard that that is why American cars have bigger seats.😉
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay I started to record oil usage per month on ...
By ian33a , 2 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 6 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 11 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 1 day ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 1 day ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 3 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 4 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 6 days ago
SPONSORS
