Last seen: Dec 14, 2025
This is actually based on the same chipset as the Svenar and if it wasn’t for my need to control dry contact switches the Svenar would have been a dec...
Thanks for the advice Brandon, when I tried (and dramatically failed) to balance the rads last winter I noticed that on some rads the TRVs were on the...
I did look at your suggestion of minimal modbus but as I am deep down the Home Assistant rabbit hole I have parked that for now but it does look like ...
yeah I have opted for the PoE option as I prefer wired, but I realise others may need a wireless solution and are more likely to have power close to t...
That was one of the issues we were having, the installer kept banging on that the flow rate was really impressive and that we should be amazed by his ...
I am also looking into the Grant R290 as it may also be a Exinda/Midea clone as I want to add this to my Home Assistant Integration. Obvs not owning o...
This is a very interesting thread I am currently deep into the rabbit hole of building my own smart controller pretty similar to the svenarr but with ...
The pumps on the Grants are beasts mine is on the lowest setting and still shoving 28 L/min through the system on full whack it was shifting over 40 L...
I am quite evangelical about my ASHP, even though the install was a nightmare, 9 months on we are pretty sorted now, although we still have leaks!
Really looking forward to this! Maybe volunteer as a guinea pig for the latest greatest heatpump with the latest greatest controller! Did you ever thi...
@adamk I have a Grant Aerona3 so it is a physical jumper switch on the unit the you have to flip up or down in a certain combination that gives you Hi...
When I tried to balance my rads I ended up causing an almighty racket, I had to fully open everything again and I also put the pump on the lowest sett...
Latest Posts
-
If you've got the same sort of inverter arrangement as ...
By Transparent , 48 minutes ago
-
RE: Setback savings - fact or fiction?
I have managed to get the data points in a scatter plot...
By cathodeRay , 1 hour ago
-
RE: External pipework insulation
They do? But that isn't apparent from the photos we'r...
By Transparent , 1 hour ago
-
RE: New Fogstar 15.5kWh upright solution
Inverters can pick up cell voltages and the overall bat...
By Transparent , 2 hours ago
-
RE: My Powerwall 3 Consumes 3-4 kWh/Day in Self-Consumption: Is This Normal?
@editor Thank you so much for looking into this for me ...
By Caron , 2 hours ago
-
RE: Mitsubishi Ecodan R290 10kW performance
I have the CN105 'dongle' connected to my system, which...
By Sheriff Fatman , 3 hours ago
-
RE: Solis S6-EH1P8K-L-PLUS – Why I Chose It and What I’ve Learned So Far
I've been looking at the S6-EH1P8K-L-PLUS, but put off ...
By energy9165 , 3 hours ago
-
RE: Speedcomfort radiator fans
Too expensive IMHO for a whole house, at this point do ...
By JamesPa , 3 hours ago
-
RE: Say hello and introduce yourself
@velcro welcome to the forums. Please feel free start a...
By Mars , 15 hours ago
-
Daikin EDLA11D3V3 DHW Settings
I have a newly installed EDLA11D3V3 which I'm still get...
By Velcro , 16 hours ago
-
@jamespa I have found that it comes as a shock when we ...
By Toodles , 18 hours ago
-
RE: Need Help Optimising My Rushed ECO4 Install: 12kW Bosch Heat Pump
Hi @mickamills . Welcome to the forum. It sounds like...
By bontwoody , 20 hours ago
-
RE: Midea ASHP – how to set weather compensation
@curlykatie did you get sorted with this?
By MickaMills , 20 hours ago
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
The FT levels off at either the set point OR the minimu...
By AndrewJ , 2 days ago
-
RE: MyVaillant Connect Regular Disconnect
Thanks. Yes, if the time is consistently 11pm every nig...
By buckwem , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@transparent Thanks, this helps. Could it be that St...
By Batpred , 2 days ago
-
RE: Clivet ASHPs and weather compensation
Simon did share a lot of very helpful advice. On furthe...
By ambris , 2 days ago
-
