Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
@toodles The major problem is that the generating companies, the energy traders, the national grid, the DNO's and the electricity supply companies a...
It is not just the fact that electrical energy needs to be moved from A to B, but also the quantity that needs to be moved at any given time. My perso...
@toodles Rather than encouraging consumers to use more energy, in an ideal World excess generation should be being stored in bulk storage battery sy...
I suspect that James has misinterpreted (which is not difficult to do) the text in the manual concerning the WL settings. With regard to the PWM cont...
I think that balancing the heat emitters is probably more difficult than setting the WC curve, the important aspect is not to try to rush either. As...
It should still be possible to set up your system so that it operates smoothly in weather compensation mode, without the benefit of a homely system.
I think that you are wrong, the cycling still occurs with the buffer tank isolated. Ian and I went through all this months ago.
Since being installed over 10 years ago, our 4kWp solar PV system has generated electrical energy every day, the maximum was over 25kWh, while the min...
As far as orientation of the panels is concerned it depends upon your primary objective. If you wish to maximise generation, then South facing would p...
You will require solar panels containing bypass diodes, which basically 'bypass' the shaded panels, or even the shaded portion of an individual panel....
@iantelescope Potable water is fit for human consumption, drinking, cooking etc.
@marvinator80 I don't know about the rules in Scotland, but I think that planning permission would be required since you also have a heat pump.
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 12 hours ago
-
@kilgorexv, I actually think doing your own calculation...
By Mars , 12 hours ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 1 day ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Swings and Roundabouts, you win some…. ...
By Toodles , 2 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 2 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 2 days ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
There is scope for product development here. I for one...
By JamesPa , 2 days ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 3 days ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 5 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 6 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 6 days ago
SPONSORS
