Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 16, 2026
@iancalderbank I did Ian, but the entries dont always have contact details. I also looked atbut it doesnt seem to be up and running yet.
@allyfish No I didnt ask 🙄
@mikefl Not in the airing cupboard, I can only pray about the loft! But at least she is warm and has hot water now 🙂
All sorted now, thats for the help, here is the offending Controller, thankfully the push fit fittings have some movement in them 🙂
@jamespa Thanks James, Am I reading the tables for the 16kW model correctly and that its maximum capacity at any temp is 11.91 kW. If so how on earth ...
@mikefl 🙁 no didnt work, so next step check power
@mikefl Thanks Mike, i may have not held the on/off button long enough. Ill check again. 🙂
@derek-m I agree!, not my installer though Derek, just helping out someone. I knew Grant discouraged people messing with their controller, but this ta...
So I found the grant controller, helpfully situated under some pipes! Unfortunately it shows nothing on the screen and the on/off button does nothing ...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Switch suitable to change between two inverter CT's
It depends An unloaded current transformer can output...
By bobflux , 5 hours ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@batpred They offered both, I went with Pro. As an amat...
By baroquebank , 16 hours ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
@penval, really useful update. After all the discussion...
By Mars , 1 day ago
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 2 days ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
D'oh - of course. I shouldn't post before my brain is f...
By Old_Scientist , 3 days ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 3 days ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 3 days ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 3 days ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 3 days ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 3 days ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 4 days ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 5 days ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 5 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 6 days ago
SPONSORS
