Search with Wattson
Activity
 
Notifications
Clear all

Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!

bontwoody
bontwoody
@bontwoody
Contributor
Noble Member
Joined: Mar 5, 2022
Last seen: Aug 31, 2026
Topics: 39 / Replies: 1019
Reply
RE: Heat Pump, DHW, UFH and Radiator Install

@jamespa Its a lot more than I had managed to work out James, so thanks yes. Ive offered to switch the pump for her as a belated wedding present, so w...

2 years ago
Reply
RE: Heat Pump, DHW, UFH and Radiator Install

@toodles LOL, I did point that out to her 🙂

2 years ago
Reply
RE: Heat Pump, DHW, UFH and Radiator Install

@toodles I suppose anything is possible. I wish I had took a better photo of the cylinder so I could perhaps look it up and see its connections. Perha...

2 years ago
Topic
Reply
RE: Samsung Gen7 setup

@robs Wow. That’s quite a difference!

2 years ago
Reply
RE: Samsung Gen7 setup

@raiph So if its all in the box, my guess would be it is already using PWM to control the pump. It would be madness not to given that the facility is ...

2 years ago
Reply
RE: Samsung Gen7 setup

@raiph I would assume you could manually alter the pump speed, or if it is of a compatible type it can be controlled via Pulse Width Modulation direct...

2 years ago
Reply
RE: Samsung Gen7 setup

@raiph So it will be cheaper to heat your domestic hot water overnight if you have a large enough tank to meet your daily needs. I dont heat my DHW us...

2 years ago
Reply
RE: Battery sizing - How low can you go!

So just to keep this thread updated, here is the latest months data. October has been mild and the potential savings of having a second battery are on...

2 years ago
Reply
RE: Is my setback/preheat doing any good?

@cathoderay I see what you mean. I am able to show flow rate on the graph and it seems the pump gives a burst (for 2 minutes) when the heat pump goes ...

2 years ago
Reply
RE: Is my setback/preheat doing any good?

@cathoderay Here is a zoomed in image. The water loses 7 C in just under 3 hours. All my pipework runs through the loft of my bungalow and has standar...

2 years ago
Reply
RE: Is my setback/preheat doing any good?

The flow and return temperatures are measured by inline temperature probes from my heat meter, so Im pretty sure they are giving an accurate picture. ...

2 years ago
Page 39 / 89
Share:

SPONSORS

Join Us!

Installer Finder

Degrees of Separation

Latest Posts

SPONSORS

Click to access the login or register cheese
Protected By
Shield Security PRO