Forums

Forums
Renewable Heating
Air Source Heat Pum...
Grant ASHP - flow t...
 
Notifications
Clear all

Grant ASHP - flow temp on display often nonsensical

 
Air Source Heat Pumps (ASHPs)
Last Post by Crimson 10 months ago
4 Posts
3 Users
0 Reactions
735 Views
RSS
 Crimson
(@crimson)
Reputable Member Member
Joined: 2 years ago
Posts: 214
Topic starter 20/11/2024 9:19 am  

I’m currently tweaking my Grant ASHP WC to get rooms to decent temperatures.

 

A very specific issue I’m seeing is upon checking the flow and return temps (hold down button 02 = flow, 09 = return), the flow most often is reporting nonsensical temperatures, eg 70C etc.

 

Is this common with Grant ASHPs?

 

It’s quite frustrating as I just have to refer to a weather reckoner sheet a forum user made to work out the temperature and check against some probes I have just before heating zone and around my LLH.

 

 



   
Quote
Mars
 Mars
(@editor)
Illustrious Member Admin
Joined: 5 years ago
Posts: 3435
20/11/2024 9:49 am  

I suspect @allyfish might be able to shed some light on this.


Pre-order: The Ultimate Guide to Heat Pumps

Subscribe and follow our Homeowners’ Q&A heat pump podcast


   
ReplyQuote
 AllyFish
(@allyfish)
Noble Member Contributor
Joined: 3 years ago
Posts: 497
20/11/2024 4:30 pm  

Posted by: @crimson
↑

(hold down button 02 = flow, 09 = return)

Hi @crimson, I think field 2 is compressor discharge temperature, field 0 is return water temp, 9 is leaving water temp. Check the Grant installation manual.



   
ReplyQuote



 Crimson
(@crimson)
Reputable Member Member
Joined: 2 years ago
Posts: 214
Topic starter 20/11/2024 4:52 pm  

@allyfish thanks! My awful memory had it completely wrong, that makes far more sense



   
ReplyQuote
Forum Jump:
  Previous Topic
Next Topic  
Share:

Join Us!

Podcast Picks

Latest Posts

Click to access the login or register cheese
x Powerful Protection for WordPress, from Shield Security
This Site Is Protected By
ShieldPRO →