Recent Posts

| Forums | Topics

Page 25 / 138 Prev Next

Posts with their shortened content
	RE: Running from backup generaor in powercut? By Toodles, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	@batpred In our case, 3 times each day when the Octopus Cosy hours stop! Regards, Toodles.
	RE: Heat pump not reaching flow temperature By johnd, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	@davec installer swapped it out on the 28th November.
	RE: Running from backup generaor in powercut? By Batpred, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	As the Iberian blackout reminded us, anything you don’t exercise now and then can show a habit of sulking when you really need it… 😄 One small upside of having a battery is that it gets used ...
	RE: Heat pump not reaching flow temperature By DaveC, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	@johnd currently set at 40 degrees flow, actual was displaying 38. just switched the immersion heater off and the flow temperature has started to drop. External temp now at 0 degrees. We've used 76kWh...
	RE: Heat pump not reaching flow temperature By johnd, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	@davec what flow temp are you setting it too?
	RE: Heat pump not reaching flow temperature By johnd, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	@davec Attachment : PXL_20260110_173314123.jpg Yep we do.
	RE: Heat pump not reaching flow temperature By DaveC, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	@johnd do you also have a plastic container to catch any of the glycol overflow if it ever over pressures? Attachment : IMG_0105.jpeg
	RE: Advice for a novice on Mitsubishi Ecodan 6kW By RobS, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	Hi @sheriff-fatman Cycling at 5C and below is usually defrosts. The other cause can also be an internal thermostat cycling the heat pump due to the WC curve being too high. How often have you seen a...
	RE: Heat pump not reaching flow temperature By DaveC, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	Hi @johnd Yes we had the defrost timer extended but we have still had to have the immersion heater on as well otherwise the ASHP isn’t able to reach or maintain the flow temperature when the external...
	RE: Heat pump not reaching flow temperature By johnd, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	@davec This is interesting, I only have the 223344 code, I assumed was full access. Are you able to see the defrost cycle interval parameters with the higher access?
	RE: Heat pump not reaching flow temperature By johnd, 3 days ago Forum Air Source Heat Pumps (ASHPs)
	@davec Sounds like we are in the same boat. Did the installer extend the defrost intervals (default is 45 mins according to the installer)? This seems to have made a big difference, instead of loopin...
	RE: Recommended home battery inverters + regulatory matters - help requested By Batpred, 3 days ago Forum Energy Storage
	The diagram describes what happens inside the Solis. All these relays are electronically controlled by the firmware it runs. By bonding I understand that there is another internal circuit that connec...