Last seen: Oct 14, 2025
@jamespa The problem in taking the gas figure is that everyone consumes differently. I had a similar issue about my EPC. But as the surveyor correctly...
@matban , I have a couple of thoughts. 1) consumer protection act 2015, fitness for purpose. 2) You appear to be saying you have heat loss of 5kw, so...
@jancold I’m not expecting to turn my heating on for at least a couple of weeks, but will certainly try out that link to the madoka and see if that p...
@jancold Good afternoon. So I have had a conversation with my good friend, ChatGPT and this is what s/he said. ” ok, so in weather dependent m...
@jancold Hi again, I Don’t know what you mean when you say you set the madoka high. If you are running on the weather dependent mode (WDM) I don’t thi...
@jancold yes, of course. I will be very interested to see how you get on with it. Especially when the outside temps get lower. Although if you are alr...
@jancold I have a Daikin Altherma 3 8kw. Looking at your mmi, it looks as if it set a little non standard. The base setting is usually 45c at -2 or wh...
@mikeatthezoo , you said you’ve had some estimates. Did you layout all these queries to the suppliers who quoted you. Did they provide any advice?
@downfield Yes, that is the case. I did ask them, but they confirmed. I understand the deal is even better than the price tag, because they also exten...
@toodles , thank you so much. Spoke with Cinergi today, they were very helpful and are hopefully going to do a technical appraisal of my system. Feeli...
@toodles , you are using homely aren’t you, and I believe it’s the homely that is controlling the flow rate, is that correct. I tried to contact homel...
Latest Posts
-
@editor another great episode, but same as @phil-bell I...
By Grantmethestrength , 6 hours ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
I have the same unit and controller and it has been a j...
By Grantmethestrength , 7 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
@agentgeorge this is a pic of the bleed valve that’s sn...
By AdamK , 9 hours ago
-
RE: Havenwise App Help & Forum Support – Get the Most from Your Heat Pump
@nickhorne Unfortunately not. We take the "normal" IOG ...
By HCas , 9 hours ago
-
RE: Mixture of copper and plastic CH pipework. Will it be ok, or need changing?
In principle yes. Some heat pumps (I think including D...
By JamesPa , 10 hours ago
-
RE: New Fogstar 15.5kWh upright solution
For the common benefit, a quick update on this. Fogs...
By Batpred , 11 hours ago
-
RE: Solis S6-EH1P8K-L-PLUS – Why I Chose It and What I’ve Learned So Far
Some of the circuits in my home are not protected by RC...
By Batpred , 11 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@editor I had to deal with E.ON Next while proces...
By TechnoGeek , 12 hours ago
-
RE: Aira Heat Pump: Stylish Scandinavian Heating
Aqara sells some inexpensive hubs (usb dongle size) tha...
By Batpred , 13 hours ago
-
RE: Extend the colder range of the weather compensation curve?
@thebinman In answer to this and personal...
By TechnoGeek , 13 hours ago
-
RE: Installer Fitted 9kW Instead of 11kW Heat Pump and Changed MCS Paperwork - What do I do?
And here is what the Homely plots say for the last few ...
By Toodles , 14 hours ago
-
RE: Faulty Clivet heat pump out of the box
@steveimpey I’m always watching 👀My Clivet cont...
By Mars , 20 hours ago
-
RE: When to use Octopus Intelligent Go tariff with my heat pump and battery
@treewizard That's probably fine, provided as you say...
By GrahamF , 21 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
16Kw AIROSD Manufacturer: Foshan Model: QBKFXFC-...
By Polar bear , 21 hours ago
-
Just a suggestion but upload your images to an AI agent...
By RadWhisperer , 23 hours ago
-
RE: Daikin Wireless Thermostat
The switch from WDC to LWT i.e. pure WC is fairly strai...
By RadWhisperer , 23 hours ago
-
RE: Bosch CS5800i 5kW - Experience So Far
Thank you for your continuous research, and posts. As y...
By ectoplasmosis , 1 day ago
-
RE: Trying to understand my Nibe F1245
@barry-sharp, is this something you could help with?
By Mars , 1 day ago
-
I signed up for this, I think it will be a good one. Al...
By ASHP-BOBBA , 1 day ago
