Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Nov 3, 2024
@Mars yes I watched your initial video on this recently and made a lot of sense , but as you say it’s a learning curve, would certainly need to ...
@ectoplasmosis yes it’s certainly a different mindset from 40 years of gas boilers and a room stat! so you don’t have any feedback of any roo...
@ectoplasmosis Appreciate ultimately it is on/off but what I meant is it is able to maintain the system on from 6am-10pm with each room at exactly ...
@ectoplasmosis seems to split opinion this one, I want to try both ways and see the results , each room can call for heat and has a generous te...
@damon What is that base?? This is temporary and was last minute , we had to raise the unit to get the correct fall for the drain ...
Ok so it’s finally in, little bit of remedial work to do but generally working performing well although fairly mild so let’s see how the next few m...
Thanks for the advice, yes I had a bad feeling from them, they seem to be very new to this arena , guy who came was 25+ years on the Gas side and has...
ok so just had British Gas here, didn't even start the survey.... They have to change all Pipework!! , we should have been told apparently. So...
@cathoderay Yes the living room and kitchen are the big problems , big voids to heat and will be toasty at ceiling level no doubt. The independen...
ok interesting , have just done my own survey using the Freedom v3.3 spreadsheet. (attached) Have aired on the side of caution when pre set options ...
@ianmk13 No just the headline figures 🙄
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay I started to record oil usage per month on ...
By ian33a , 1 hour ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 5 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 10 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 1 day ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 1 day ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 3 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 4 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 6 days ago
SPONSORS
