Last seen: Jan 24, 2023
We are seeing very similar behaviour with our flow temps. After a couple of weeks of nice sunny days here it has now become colder and cloudier, so ...
So, ran our system in Room Temperature mode for a week or so, and monitored flow temperatures. I came to the conclusion that it doesn't work very wel...
@alec-morrow sorry for the slightly delayed response - just been fighting off Covid! I'm a little unsure about what you mean. Would mixers enable e...
@kev-m Yes, it is the Mitsubishi wireless controller that I am using. You raise an interesting point because obviously there is no way to have tw...
@kev-m A quick update. After thinking about the problem for a little while and re-reading the manual I came up with really simple solution - swap th...
@kev-m Thanks for that information, it confirms what I thought was happening. I'm not going to write off Room Adaptation just yet, but may have t...
@alec-morrow FTC is the Mitsubishi Flow Temperature Controller The ASHP was retrofitted so the UFH uses controller and stats from Uponor as origin...
I found that when taking images outside it was better to go closer so that there was no sky in the frame. The sky shows as a lot colder than the hous...
@skd @SuzeR We also have an 11.2kW Ecodan. Generally very quiet except when the ambient drops. We only have one internal pump (something I am stil...
Our towel rails are in the same circuit as the upstairs radiators, so only get warm when the heating is on, with one exception. The ensuite in our ma...
I understand what you're saying, but it's not just that the guy who came yesterday thinks it is sub-optimal, it is actually wrong. Continuing to run ...
- 26 Forums
- 2,396 Topics
- 54.3 K Posts
- 373 Online
- 6,077 Members
Join Us!
Worth Watching
Latest Posts
-
Power outages and storms: A surprisingly good DNO experience
We’ve lived rurally for just over seven years now, and ...
By Mars , 16 seconds ago
-
RE: Heatpunk Floor plan issues
It's usually the complete opposite... seldom that Safar...
By Mars , 7 minutes ago
-
RE: Setback savings - fact or fiction?
Hi @sunandair We also have a Mitsubishi Ecodan but w...
By RobS , 8 minutes ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
Whilst I agree with @sheriff-fatman’s point, I checked ...
By Majordennisbloodnok , 48 minutes ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
@mike-patrick interesting update - thanks.I've been thr...
By Tim441 , 1 hour ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
I remember reading in some inverters. They mandate a se...
By Batpred , 2 hours ago
-
RE: Fan is clipping ice build up from the front of unit.
@majordennisbloodnok I’ll not go there thanks! Toodles.
By Toodles , 3 hours ago
-
RE: Running from backup generaor in powercut?
@majordennisbloodnok Back in the 80’ or 90’ we had a te...
By Toodles , 3 hours ago
-
RE: Running my new Nibe ASHP efficiently
I'm new to the forum. Did you get a reply to this last ...
By Mike @ Camelot , 5 hours ago
-
RE: ASHP Energy Consumption: Aira 12kW heat pump
@grantmethestrength MCS requirements for DHW capacity h...
By Toodles , 5 hours ago
-
RE: New Mitsubishi Ecodan 11.2kW installation - L9 errors and maybe more
Great to hear! I just figured this out a day or tw...
By anotherdaveuk , 6 hours ago
-
RE: Help me keep the faith with my air source heat pump installation
@adamk I'm observing my own system at low temperatures ...
By dr_dongle , 11 hours ago
-
RE: Free Ecoheat Heat Pump Install
@deltona Yes older houses are problematic like that, bu...
By bontwoody , 1 day ago
-
RE: Radiator sizing sanity check
As I mentioned early on the cost of supplying and fitti...
By JamesPa , 1 day ago
-
RE: Electricity price predictions
Great point, one of the key ones in my chat with Octopu...
By Batpred , 2 days ago
-
RE: New Fogstar 15.5kWh upright solution
Let me point out that there are many Chinese suppliers ...
By Transparent , 2 days ago
-
RE: Weather compensation- why you should use it
@majordennisbloodnok — The Two Ronnies Mastermind sketc...
By cathodeRay , 2 days ago
-
Just realised that this image of the cylinder cupboard ...
By Sheriff Fatman , 2 days ago
-
RE: Rodents! A word of warning for heat pump owners
Two thoughts: 1: Let's ask @david-s if Primary Pro in...
By Transparent , 2 days ago
-
RE: Solis S6-EH1P8K-L-PLUS – Why I Chose It and What I’ve Learned So Far
In the diagram below, I describe my understanding of th...
By Batpred , 2 days ago

