Last seen: Jul 11, 2025
@jamespa Hi, yes I have flexible pipework. Following an inspection, the installers were required to sleeve and insulate the pipes where they pass thro...
Just want to say I've done an experiment with mine. I have recorded the sound of the unit on my phone and played it back outside through a speaker sat...
@dwynwen hi, it's a perfectly fine place to air your disappointment. I have had a similar experience and apart from dealing with the noise all day, I...
@dwynwen so sorry to hear about this experience. I would advise that you do have them back to fix and finish if they are offering. Ask them if they c...
@odynsfee Hi, I only just saw your post. Sorry to hear you are having similar issues. My installer experimented with switching one pump to 2 and one t...
@editor Hi, Thanks for asking. Short answer is not yet but here's an update. The niceic inspection didn't cover noise but there were plenty of thing...
@transparent thanks. I'll look into it.
@bontwoody thanks. I'm probably having some adjustments made to piping so I will ask about anti frost valves. My midnight Google suggested glycol migh...
@toodles yes, it was a temporary solution. I usually set it right back temp wise at night to avoid noise but when I saw the snow I remembered the glyc...
- 26 Forums
- 2,396 Topics
- 54.3 K Posts
- 333 Online
- 6,077 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Power outages and storms: A surprisingly good DNO experience
Exactly what came to my mind. Octopus is one of the few...
By Batpred , 1 minute ago
-
RE: Heat pump not reaching flow temperature
I don’t know how you feel about coincidences, ...
By DaveC , 4 minutes ago
-
RE: Running from backup generaor in powercut?
@batpred In our case, 3 times each day when the Octopus...
By Toodles , 14 minutes ago
-
RE: Advice for a novice on Mitsubishi Ecodan 6kW
Hi @sheriff-fatman Cycling at 5C and below is usuall...
By RobS , 40 minutes ago
-
RE: Recommended home battery inverters + regulatory matters - help requested
The diagram describes what happens inside the Solis. Al...
By Batpred , 2 hours ago
-
RE: New Fogstar 15.5kWh upright solution
@batpred Here's the latest Fogstar ready built pack....
By Bash , 2 hours ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
@mike-patrick yes, even though the current system is ru...
By Tim441 , 2 hours ago
-
Considering MLCP (Multi-Layer Composite Pipe) for ASHP
Hi - I'm new to the forum but I've been researching ASH...
By iotum , 3 hours ago
-
RE: Solis inverters S6-EH1P: pros and cons and battery options
Solis confirmed that the S6 works with a single battery...
By Batpred , 3 hours ago
-
RE: Who has a V2G EV installation
I am wondering if in any V2X, would the car battery eve...
By Batpred , 4 hours ago
-
RE: Setback savings - fact or fiction?
Yes, by calculating it manually from the minute data, w...
By cathodeRay , 5 hours ago
-
Fan unit Making terrible noise HELP!!
One of a pair of fan units on an Earth Save Classic II ...
By GutoFfowc , 5 hours ago
-
RE: New Mitsubishi Ecodan 11.2kW installation - L9 errors and maybe more
OK. I think your system, which seems well designed, is...
By JamesPa , 7 hours ago
-
RE: Heatpunk Floor plan issues
It's usually the complete opposite... seldom that Safar...
By Mars , 20 hours ago
-
RE: Fan is clipping ice build up from the front of unit.
@majordennisbloodnok I’ll not go there thanks! Toodles.
By Toodles , 23 hours ago
-
RE: Running my new Nibe ASHP efficiently
I'm new to the forum. Did you get a reply to this last ...
By Mike @ Camelot , 1 day ago
-
RE: ASHP Energy Consumption: Aira 12kW heat pump
@grantmethestrength MCS requirements for DHW capacity h...
By Toodles , 1 day ago
-
RE: Help me keep the faith with my air source heat pump installation
@adamk I'm observing my own system at low temperatures ...
By dr_dongle , 1 day ago
-
RE: Free Ecoheat Heat Pump Install
@deltona Yes older houses are problematic like that, bu...
By bontwoody , 2 days ago


