Last seen: Jun 11, 2022
@derek-m here is all the info on my house, in terms of area, heat loss, & radiators. My Solar is still awaiting full commissioning, so I can't say...
Speaking of manuals, here are the links for the MMSP Quick Start Guide and the MMSP Hardware Installation & Configuration Guides. They explain wha...
@kev-m also note that the manual specifically says that you have to power off the whole system before you flick those dip switches.
@derek-m as they say, "Every little helps" 😀 Speaking of which, my COP just hit 5.1 - Thank you
The last thing that I did was to change the Flow Temperature settings at ~2pm on Monday 8th. I set them to 20C & 50C, as opposed to the default se...
@derek-m @kev-m I started following the advice from @derek-m & tweaking my curve at around 4:30pm on Saturday 6th My ASHP went live on Friday ...
@kev-m @derek-m I'm just getting my figures to respond to your ASHP thread to the question of curves, flow temps & outside temperatures.
@derek-m The electrician who is coming is very nice, & has proved to be more than helpful when it comes to answering my questions. I'm going to qu...
@derek-m My system currently has the basic, stock Ecodan monitoring built in. Alas, I don't have the MMSP setup, as they wanted to charge me an extra ...
@derek-m super good news. I set the target temperature on my Honeywell "controller" to 25°C, then went out for the afternoon. Happily, the Ecodan seem...
Press & Hold the Menu button, as normal. Once it goes into edit mode, scroll along until you get to the Settings icon & click OK The Qui...
@markc - apologies for not answering this one sooner. This is what mine shows when I press F3 from that screen
Latest Posts
-
RE: Share Your Experiences with Heat Pump Manufacturer Support
Ok I'm not going to get into a chicken and egg discussi...
By JamesPa , 6 minutes ago
-
RE: Why do we need pressurised systems?
@old_scientist If that were the case (and it might well...
By Toodles , 3 hours ago
-
OK... I'm here. But the amount of my time needed to add...
By Transparent , 6 hours ago
-
Hi, I'm a new member from Italy, with a new LG therma V...
By Carlo , 10 hours ago
-
RE: 300 Liter Tank - Do I have to heat it all?
There’s no second hand market for DHW tanks (I was told...
By Judith , 10 hours ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
We had an excellent four months (11/3 to 15/7) generati...
By JulianC , 19 hours ago
-
RE: Is this just haze or something more?
I think the present somewhat cooler hazy days show the ...
By Judith , 1 day ago
-
RE: My misgivings about installing ASHP and solar panels via the ECO4 scheme...
All noted and accepted and as I say I am sorry that you...
By JamesPa , 1 day ago
-
I think it is very much me that is sitting outside the ...
By Grantmethestrength , 1 day ago
-
RE: Replacing Refrigerant on Mitsubishi Heat Pump
@davidalgarve It should just be recovered by both servi...
By dgclimatecontrol , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
Aggregators have been recognised for many years, and it...
By Transparent , 2 days ago
-
RE: Help me keep the faith with my air source heat pump installation
Great news I edited my previous post (probably af...
By JamesPa , 2 days ago
-
RE: Double or Triple Glazed Windows?
@toodles Glad to hear things are progressing well for y...
By TRBob , 2 days ago
-
How to waste energy (and time) playing with AI.
A friend of mine who subscribes to an AI service was ex...
By Toodles , 3 days ago
-
RE: Heat Pump Books For Beginners – Bodge Buster & From Zero To Heat Pump Hero
@topher you’re more than welcome to, yes. I’ll send you...
By Mars , 4 days ago
-
RE: Fitting new shower valve ..........
I’ve never taken a chance when fiddling and changing ou...
By Mars , 4 days ago
-
You should contact the council and report the unsatisfa...
By JamesPa , 4 days ago
-
RE: Benefits of an extra horizontal loop for GSHP
I would deffo install an additional slinky run, especia...
By Transparent , 4 days ago
