Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering youāll be able to ask questions, join discussions, follow topics youāre interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 8, 2026
@terry1812 Interesting it is a bit like a PID controller which reduces power input as the target temp is approached to avoid overshoot I used to use o...
@jamespa OK I have found that setting and reduced by 1C and see how that goes.
@jamespa OK to reduce the slope by reducing the 'design temp' or/and moving the -4 to a lower temp? I'm beginning to realise I understood more of this...
@terry1812 so I set the Madoka to 24 and this happens So my Madoka my be set differently
@terry1812 sorry my reply was lost as the forum had logged me out. It definitely is on weather dependant and I have set it to the design and remove...
@terry1812 That is very helpful, thanks. Since finding the included paperwork was irrelevant I have now downloaded and printed out the 68 page user ma...
@jamespa Thanks, The Madoka is a Daikin name for a room thermostat, the MMI I call man monkey interface!! seriously who makes these control system nom...
Iām hoping for a bit of help. The system is an Octopus install with a Daikin 6Kw Heat Pump. Now that I have started heating I am trying to get to ...
I am with Tesco Insurance and when I rang to check that they covered a Heat pump they said they do. I went on to tell them my install dates which were...
Now a week after the system was commissioned. Generally I have left the settings as they were apart from lowering the DHW to 45C and raising the house...
@jamespa I see that boats in saltwater are now being suggested to use aluminium anodes which I believe also work in fresh water, whereas zinc is passi...
@lucia yes I'm well pleased and I guess after I have settled up we'll get our referral credit which will be nice. The gas meter is gone as well.
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Vaillant Aurotherm - Heater Wire Position
Batpred I was trying to establish where the heater elle...
By trebor12345 , 10 minutes ago
-
RE: Adventures in heat loss calculations
Posted by: @jamespa At this point its probably worth...
By Rob of York , 30 minutes ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 10 hours ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 15 hours ago
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay @jamespa I've managed to get some nice re...
By Rob of York , 2 days ago
-
RE: 7kW EV Charger Options Advice
Doh, not sure that I was thinking straight there, less ...
By Rusty , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
Iām really liking reading through this thread and the r...
By Judith , 2 days ago
-
Thank you @trebor12345
By rgabor , 2 days ago
-
Panasonic Free Multi Z and Etherea Internal units.
My prospective installers have suggested the Panasonic ...
By Toodles , 3 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Great. You just need to find a way of cranking up your...
By JamesPa , 3 days ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
We had two heat pumps installed without Govt funding. H...
By Rob of York , 3 days ago
-
My Adapt is finally installed and running! Almost a yea...
By tomasmcguinness , 3 days ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 5 days ago
SPONSORS
