Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering youāll be able to ask questions, join discussions, follow topics youāre interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 8, 2026
@lucia Thanks for the referral I'll put it in my mail to Brad before signing the contract. Stu , my surveyor said Kraken sometimes replaces radiator...
@jamespa Agreed and I have made the site for the pump easier for them to install.
@lucia the surveyor did mention the Kraken software glitch which he said he would correct. However there will be two other rads in that room and the d...
@lucia I got my Octopus contract wohoo! Guess the design temp? yup 50 C. However I am generally pleased at first sight but will be checking over the ...
Sounds like Outfox the Octopus. 😊 . Which is my plan when/if they give me a proposal.
Do I get ten goes for watching the video twice. 😊
Interesting I just checked my EPC and it is just C (70C) so if i put in a heat pump it will be downgraded to a D as the boiler and DHW were rated as g...
@njt well yes, just hang tight it'll be worth it!
@johnmo how important is the pipework? Mine comes of the boiler at 22mm then branches off to upstairs radiators in 15mm and downstairs in 15mm. No sur...
@njt I also started at the end of July but a resurvey 10 days ago, something to do with the pipe drop between tank and outside. I'm not getting any fe...
Even getting a proposal would be good. I am still waiting. I take what @johnmo says but if they stay with my original quote ( so long ago I barely rem...
I think @lucia raises a serious point about Kraken data harvesting. I saw on another of Nicholas's videos he talks of the EV charging Tariff Intellige...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Vaillant Aurotherm - Heater Wire Position
Batpred I was trying to establish where the heater elle...
By trebor12345 , 1 hour ago
-
RE: Adventures in heat loss calculations
Posted by: @jamespa At this point its probably worth...
By Rob of York , 2 hours ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 11 hours ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 16 hours ago
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay @jamespa I've managed to get some nice re...
By Rob of York , 2 days ago
-
RE: 7kW EV Charger Options Advice
Doh, not sure that I was thinking straight there, less ...
By Rusty , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
Iām really liking reading through this thread and the r...
By Judith , 2 days ago
-
Thank you @trebor12345
By rgabor , 2 days ago
-
Panasonic Free Multi Z and Etherea Internal units.
My prospective installers have suggested the Panasonic ...
By Toodles , 3 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Great. You just need to find a way of cranking up your...
By JamesPa , 3 days ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
We had two heat pumps installed without Govt funding. H...
By Rob of York , 3 days ago
-
My Adapt is finally installed and running! Almost a yea...
By tomasmcguinness , 3 days ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 6 days ago
SPONSORS
