Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
Hi Mike, From the photo's the pressure gauge is from a company called Intatec and will probably be one or other of the following:- Code: GP1576004...
Hi Mike, The leaking valve may in fact be the pressure relief valve, that was incorrectly adjusted. Does it have a manufacturers label? If so, pleas...
Well done Julian.
Hi Foggy, Our gas boiler is 20+ years old and deemed obsolete, and I was struggling to obtain a new heat exchanger. Fortunately my wife managed to l...
Julian, I thought the objective was to collectively reduce our carbon footprint as well as costs. Maybe we are fortunate in that our home is not lar...
Hi Mike, I find it quite surprising how much electricity you are still using at this time of year. What equipment do you have connected? Are you u...
Hi Foggy, I cannot dispute your decision to stick with gas for the time being, since I did exactly the same thing myself, though rather than replace...
Hi Phil, I had exactly the same thoughts as you when our old gas boiler sprung a water leak in February. I was considering installing an A2W ASHP, b...
Hi Phil, I presume that you are keeping your oil boiler for the time being. If it is possible and cost effective you may wish to see if your oil boi...
Hi Mars, I posted some time ago about that community in Utrecht that was doing just that, using their EV's as battery storage.
I complied with the permitted development criteria, so did not require planning permission.
We used our A2A ASHP for cooling for the first time today when the indoor temperature went above 25C. Don't worry we were using carbon neutral energy ...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
Cloudy one done, might get the sunny one tomorrow or de...
By Watcher , 1 hour ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 18 hours ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 1 day ago
-
At the risk of going on: A slight side issue for a foru...
By Bart , 1 day ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 1 day ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 2 days ago
-
RE: PV and battery long payback - sense check query
@jamespa I was just commenting on the speed, not sug...
By Batpred , 2 days ago
-
Readers here please note that Derril Water and many oth...
By Transparent , 2 days ago
-
RE: Advice on Vaillant Sensocomfort
Oops, I meant Sensocomfort (the UI to the controls)
By Batpred , 2 days ago
-
RE: Heat Pump Training vs. Real-World Installation
Our instal was very much the opposite. White haired blo...
By Batpred , 2 days ago
-
RE: Flushing system, cleaning and inhibitor
While skim reading a manual for our Vaillant HW tank, I...
By Batpred , 2 days ago
-
RE: 'Chinese Diesel Heater' to heat the home .....
Old thread but I'm new to the forum so new to me. How...
By BlizzardGreen , 3 days ago
SPONSORS
