Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
@saz Hi Saz, It is always difficult problem solving from afar. So, if my understanding is correct, your UFH, radiators and pipework are not new...
@saz Hi Saz, The fact that your radiators were not getting hot at the top was because they had air inside, which your installer will have removed...
@saz Hi Saz, It sounds like you have air in your system. Your installer should have bled all the air from your system, but may not have done so...
@editor Hi Mars, An excellent video, though I'm afraid it did not fill me with confidence for the future. Virtually all the areas discussed were one...
@grahamh Hi Graham, I watched the RED video with interest and was pleased to see that the designer had been trying to minimise heat loss and maxi...
@glanmenai Hi, I noted in your earlier post that you are limited for space in your backyard. I assume that you are aware that ASHP's require as much...
@editor Hi Mars, As an Engineer I have always found it very important to use the correct terminology, so I feel it necessary to discourage your use ...
@mike-patrick Hi Mike, I forgot to mention that you may be able to get a system with a little more output, it all depends on the available roof s...
@mike-patrick Hi Mike, Let me first of all say that I am a firm believer in fully utilising solar energy to reduce energy consumption. Without wi...
@editor Hi Mars, It may be useful to ask the MCS CEO about Sam's case, she still has not received any form of help and the builder and Omnie keep cl...
@editor Hi Mars, When you say that you lowered the water flow temperature from 45C to 35C, did you just lower the setting, or did you enable weather...
@editor Hi Mars, I suspect that you will not see a vast change at the moment, since the heat demand is still quite low. Please explain what you de...
- 27 Forums
- 2,746 Topics
- 64.6 K Posts
- 802 Online
- 7,152 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 11 hours ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 17 hours ago
-
At the risk of going on: A slight side issue for a foru...
By Bart , 23 hours ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 24 hours ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 2 days ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@lizzie Thank you, very interesting and useful informat...
By Toodles , 2 days ago
-
RE: PV and battery long payback - sense check query
@jamespa I was just commenting on the speed, not sug...
By Batpred , 2 days ago
-
Readers here please note that Derril Water and many oth...
By Transparent , 2 days ago
-
RE: Advice on Vaillant Sensocomfort
Oops, I meant Sensocomfort (the UI to the controls)
By Batpred , 2 days ago
-
RE: Heat Pump Training vs. Real-World Installation
Our instal was very much the opposite. White haired blo...
By Batpred , 2 days ago
-
RE: Flushing system, cleaning and inhibitor
While skim reading a manual for our Vaillant HW tank, I...
By Batpred , 2 days ago
-
RE: 'Chinese Diesel Heater' to heat the home .....
Old thread but I'm new to the forum so new to me. How...
By BlizzardGreen , 3 days ago
-
I'm not sure why you would want to make it more difficu...
By JamesPa , 3 days ago


