Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
This is one of the problems with heat loss calculations, since to make an accurate assessment it is necessary to have the actual details of the materi...
@batalto Yes, that would be 4kW per hour, based on your heat loss calculation of 8.774kW per hour at an ambient air temperature of -3C. The calcula...
Batalto, I do believe your heat loss would be given by heat pump output power per m2, since the input power would be dependent upon how efficient yo...
Sorry Batalto, I'm afraid my dry sense of humour is an acquired taste. As you are no doubt aware, men are always trying to educate women 'that size ...
Oh dear, your'e not comparing sizes are you?
Good morning Batalto, The wind speed was higher last night in our area, and I have noticed that it appears to have added about 5C to the required wa...
@jeff The thought of potentially having to tweak curves at different outside temperatures isn't something i would relish. Hi Jeff, Sorry for ...
@jeff Hi Jeff, Taking their figures at - 10 degrees the difference in flow temperature is 6.6 degrees. They say 1 degree reduction in flow roughl...
@jeff Do you think it will be cheaper to run than just using Weather compensation alone as Mitsubishi say? Any idea what % difference it might ma...
@jeff Hi Jeff, If you wish to have accurate indoor temperature control, then it would be best to use Auto Adaptation control. Whether you can j...
Hi Jeff, The simple answer is No. Auto Adaptation is a combination of both weather compensation and room temperature control. Basically, the contr...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 28 minutes ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s I too can provide some insight. We have a Cosy ...
By AndrewJ , 40 minutes ago
-
@editor Thank you for such a remarkable conclusion! (So...
By Bart , 1 hour ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 15 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@lizzie Thank you, very interesting and useful informat...
By Toodles , 18 hours ago
-
RE: PV and battery long payback - sense check query
@jamespa I was just commenting on the speed, not sug...
By Batpred , 21 hours ago
-
Readers here please note that Derril Water and many oth...
By Transparent , 22 hours ago
-
RE: Advice on Vaillant Sensocomfort
Oops, I meant Sensocomfort (the UI to the controls)
By Batpred , 23 hours ago
-
RE: Heat Pump Training vs. Real-World Installation
Our instal was very much the opposite. White haired blo...
By Batpred , 23 hours ago
-
RE: Flushing system, cleaning and inhibitor
While skim reading a manual for our Vaillant HW tank, I...
By Batpred , 24 hours ago
-
RE: 'Chinese Diesel Heater' to heat the home .....
Old thread but I'm new to the forum so new to me. How...
By BlizzardGreen , 2 days ago
-
I'm not sure why you would want to make it more difficu...
By JamesPa , 2 days ago
-
RE: Wood burner with ASHP - direct air?
@lucia FWIW installed a woodburner some years ago. ...
By JamesPa , 2 days ago
SPONSORS
