Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
@alan_w Please share any useful information.
@dant Good morning Dan, I suggest that you download the following manual and confirm that it matches your equipment before we proceed any further...
Hi HJD, Welcome to the forum, Weather compensation monitors the ambient air temperature, and varies the water flow temperature, dependent upon the...
@kev-m Thanks Justin. My heat meter is slightly different from that one in that the return meter fits directly into the meter rather than a t-piec...
@justinsb Well done Justin, it is good to know someone is reading the manual. I only do it as a last resort!!!!!!
Hi Alan, Welcome to the forum. I sent the following information to Mars recently, which you may find of interest. You may wish to have a loo...
@peacenes Hi Mirnes, I appreciate that English is not your first language, and my Bosnian is non-existent, so if there is anything that you don't...
@mike-patrick Mike, I forgot to mention that systems are set up so that the ASHP is providing heat energy to the heating circuit or the DHW, but ...
@mike-patrick Hi Mike, The important thing is to note the original settings before making any adjustments, so that you can always revert back to ...
Hi Kev, I have just noticed under section '5.1 DIP Switch Functions' of the FTC6 manual, that there are some DIP switches that need to be changed wh...
Hi Kev, Your answer is probably in the first line of your statement, 'I lost it when they installed MMSP'. If you look at section 4.5 of the FTC6 ...
@kev-m Hi Kev, I do remember reading somewhere that the approximate heat energy output can be calculated from temperature measurements and power ...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
An engineer friend of mine runs a boiler with WC. Beca...
By JamesPa , 2 minutes ago
-
@editor I agree wholeheartedly with your last post. Of...
By JamesPa , 11 minutes ago
-
RE: Is it the house or the equipment?
Yeah refrigerants are complicated. They need to have th...
By bobflux , 56 minutes ago
-
RE: Mitsubishi Ecodan FTC6 settings
The Mitsi remote thermostat should not be plugged into ...
By F1p , 13 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@lizzie Thank you, very interesting and useful informat...
By Toodles , 17 hours ago
-
RE: PV and battery long payback - sense check query
@jamespa I was just commenting on the speed, not sug...
By Batpred , 19 hours ago
-
Readers here please note that Derril Water and many oth...
By Transparent , 20 hours ago
-
RE: Advice on Vaillant Sensocomfort
Oops, I meant Sensocomfort (the UI to the controls)
By Batpred , 21 hours ago
-
RE: Heat Pump Training vs. Real-World Installation
Our instal was very much the opposite. White haired blo...
By Batpred , 21 hours ago
-
RE: Flushing system, cleaning and inhibitor
While skim reading a manual for our Vaillant HW tank, I...
By Batpred , 22 hours ago
-
RE: 'Chinese Diesel Heater' to heat the home .....
Old thread but I'm new to the forum so new to me. How...
By BlizzardGreen , 2 days ago
-
I'm not sure why you would want to make it more difficu...
By JamesPa , 2 days ago
-
RE: Wood burner with ASHP - direct air?
@lucia FWIW installed a woodburner some years ago. ...
By JamesPa , 2 days ago
SPONSORS
