Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
@davew Hi Dave, It is quite feasible to connect both pumps to OUT1, since the output is rated a 230v at 1 amp, which equates to 230 Watts of avail...
Hi Sarah, Can you provide photo's, both wide angle and close up of your UFH manifold?
To save me having to forage through the Samsung manual, do you know where the control settings for booster or back up heaters are located, and if they...
Do you have a suitable thermometer or thermometers that could be used to measure both room temperatures, and could also be taped to radiators and pipe...
Conversely, I wonder how many people are looking at their now 5 times higher, capped, gas bills, and thinking I wish I had changed to a heat pump when...
When operating in AA mode, and the compressor has been pulled back to minimum operating speed, the FTC controller has basically 'lost' control. As the...
It had been a long day and I think I mixed you up with someone else. Could you please confirm that the leaking expansion vessel that you mentioned p...
@davew Good morning Dave, I think that all my brain cells should be fully functional today, unless senility is setting in. It is to be hoped tha...
You are probably correct. It had obviously been a long day and the old grey matter was not firing on all cylinders.
I suspect starting and then stopping your heat pump is not going to get your home up to temperature and keep it there. Starting up from cold is going ...
@davew Other than the fact that all three pumps are manufactured by Grundfos, I cannot see which models.
It probably does so because your installer wired both water pumps to the same output. If there is only the one output from the controller then you req...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: The good, the bad and the not that great – my heat pump installation
@editor I completely forgot to document wha...
By Burtis , 2 hours ago
-
RE: I need help with Ecodan ASHP
@f1p It turns out there have been a solar panel install...
By Andris , 5 hours ago
-
RE: 15kw pump for 225m2 1990's house - over kill?
@seaviews your installer would be right to say that the...
By GrahamF , 5 hours ago
-
RE: Vaillant ecoTEC Plus - Flow Temp and Set Up
@trebor12345 That curve looks healthy to me. I woul...
By JamesPa , 6 hours ago
-
RE: Tradespeople on Their Phones: What’s Acceptable When They’re Working in Your Home?
Actually, that's a very important point. I've only ev...
By Majordennisbloodnok , 13 hours ago
-
RE: The Changing Jet Stream Could Challenge UK Air Source Heat Pumps
@susannasaunders can I just add to @rob-of-york s comm...
By JamesPa , 17 hours ago
-
RE: Aerotherm and weather compensation
These are likely inked. The basic explanation is tha...
By JamesPa , 17 hours ago
-
RE: Electrical works for air to air heat pump
agree with above. I have not had extra costs added wh...
By Batpred , 18 hours ago
-
Good to hear that you found a solution. Absolutely a...
By Batpred , 18 hours ago
-
RE: Are there any comparisons of DHW heat stores around?
@sarahemmm I have done things the opposite way round I ...
By Toodles , 1 day ago
-
RE: How will removing the standing charge on gas bills benefit heat pumps?
The BUS grant funding for 2026/27 will run out at the c...
By Rob of York , 3 days ago
-
-
RE: Say hello and introduce yourself
@e-a-west as the good Major said, welcome to the forums...
By Mars , 4 days ago
-
RE: How much of your renewable and home setup would still work if the internet went down?
Yes I actually have a copy of a tool that whenever a ce...
By EtchedPixels , 5 days ago
-
RE: Indevolt Batteries UK Support & Info Thread
@editor Hi, To resolve this, please tap on the A...
By Indevolt Tech , 5 days ago
SPONSORS
