Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
Many, many years ago, I remember watching a TV program about a test house that was built, I think in Sweden, with not a heat pump, but MVHR. The inc...
I have just noticed that you can see the flow rate measurement, could you explain how?
@cathoderay Actually, I don't think that cracking the structure may be too difficult, since we now have a reasonable idea of how the data is encoded...
You should not actually need to remove your buffer tank, just change it into a volume tank. Disconnect both the flow pipe from the heat pump and the f...
Was the Notify1 and 2 already in the code or did you add them? There will be a limit on the packet size available, so to transmit more data may requ...
@yogabob You are perfectly correct that COP is measured as heat energy out divided by electrical energy in. The way that a heat pump works, is tha...
I realise that it is a pain having to reload and restart your system when changing the software, but I would suggest, as a test, just initially adding...
I suppose the simplest way to assess energy efficiency could be by annual energy consumption per square meter.
@cathoderay I think that I am wrong about the data selection being based upon the variable names, unless it is done by HA. Your addition of self.b...
@cathoderay If you wish you could try adding the blue coloured code in the attached climate file and see what results are produced. From my limite...
No problem. That has happened to me on a number of times, and it always seems to occur when you have written a really long post. I think that the sy...
You could have a look at this device.
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Tradespeople on Their Phones: What’s Acceptable When They’re Working in Your Home?
Actually, that's a very important point. I've only ev...
By Majordennisbloodnok , 1 hour ago
-
RE: The Changing Jet Stream Could Challenge UK Air Source Heat Pumps
@susannasaunders can I just add to @rob-of-york s comm...
By JamesPa , 5 hours ago
-
RE: Aerotherm and weather compensation
These are likely inked. The basic explanation is tha...
By JamesPa , 5 hours ago
-
RE: Electrical works for air to air heat pump
agree with above. I have not had extra costs added wh...
By Batpred , 6 hours ago
-
Good to hear that you found a solution. Absolutely a...
By Batpred , 7 hours ago
-
RE: Are there any comparisons of DHW heat stores around?
@sarahemmm I have done things the opposite way round I ...
By Toodles , 21 hours ago
-
RE: 15kw pump for 225m2 1990's house - over kill?
@seaviews I have read you latest response re buffer ...
By JamesPa , 2 days ago
-
RE: How will removing the standing charge on gas bills benefit heat pumps?
The BUS grant funding for 2026/27 will run out at the c...
By Rob of York , 2 days ago
-
-
RE: Say hello and introduce yourself
@e-a-west as the good Major said, welcome to the forums...
By Mars , 4 days ago
-
RE: How much of your renewable and home setup would still work if the internet went down?
Yes I actually have a copy of a tool that whenever a ce...
By EtchedPixels , 4 days ago
-
RE: Indevolt Batteries UK Support & Info Thread
@editor Hi, To resolve this, please tap on the A...
By Indevolt Tech , 4 days ago
-
RE: Double or Triple Glazed Windows?
Posted by: @singlespeed With 9 years repairing windo...
By Rob of York , 5 days ago
-
@transparent we’re still running a secure version of PH...
By Mars , 5 days ago
SPONSORS
