Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
@cathoderay I have some thoughts as to what additional code may be required to obtain additional data, though I still don't fully understand how the...
@cathoderay Have you obtained any Type 01 messages recently, and if so did they show any additional data? Looking at the Type 04 group of messages...
I had not noticed that they had come through as .py files. Now corrected and opened.
I suspect it will very much depend upon the design of your system, the heat loss of your home, the heating capacity of the heat emitters, how many wat...
So begs the question, what is being done to resolve this situation?
I cannot open the files as they are not in a text format. Could you copy the code then put it into a Word documents please.
@cathoderay Hi CathodeRay, I delved a little deeper into the Python code last night and may have some possible code modifications to try. Could yo...
Welcome to the forum. I sent this post earlier today, but it probably covers your problem to some extent. It is the heat emitter end where the pro...
Hi Mike, It is the heat emitter end where the problem lies. The amount of heat energy that can be emitted by the heat emitters, is dependent upon th...
I believe that the ff (255) may be an end of data indicator, or a no data indicator, since the data you have captured is what normally appears in the ...
Did you include your solar generation in those figures?
I was thinking more on a daily or even hourly basis, since that may be more effective when adjusting the weather compensation curve. One possible wa...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Tradespeople on Their Phones: What’s Acceptable When They’re Working in Your Home?
Actually, that's a very important point. I've only ev...
By Majordennisbloodnok , 15 minutes ago
-
RE: The Changing Jet Stream Could Challenge UK Air Source Heat Pumps
@susannasaunders can I just add to @rob-of-york s comm...
By JamesPa , 4 hours ago
-
RE: Aerotherm and weather compensation
These are likely inked. The basic explanation is tha...
By JamesPa , 4 hours ago
-
RE: Electrical works for air to air heat pump
agree with above. I have not had extra costs added wh...
By Batpred , 5 hours ago
-
Good to hear that you found a solution. Absolutely a...
By Batpred , 5 hours ago
-
RE: Are there any comparisons of DHW heat stores around?
@sarahemmm I have done things the opposite way round I ...
By Toodles , 19 hours ago
-
RE: 15kw pump for 225m2 1990's house - over kill?
@seaviews I have read you latest response re buffer ...
By JamesPa , 2 days ago
-
RE: How will removing the standing charge on gas bills benefit heat pumps?
The BUS grant funding for 2026/27 will run out at the c...
By Rob of York , 2 days ago
-
-
RE: Say hello and introduce yourself
@e-a-west as the good Major said, welcome to the forums...
By Mars , 4 days ago
-
RE: How much of your renewable and home setup would still work if the internet went down?
Yes I actually have a copy of a tool that whenever a ce...
By EtchedPixels , 4 days ago
-
RE: Indevolt Batteries UK Support & Info Thread
@editor Hi, To resolve this, please tap on the A...
By Indevolt Tech , 4 days ago
-
RE: Double or Triple Glazed Windows?
Posted by: @singlespeed With 9 years repairing windo...
By Rob of York , 5 days ago
-
@transparent we’re still running a secure version of PH...
By Mars , 5 days ago
SPONSORS
