Activity
 
Notifications
Clear all
DavidB
@davidb
Member
Eminent Member
Joined: Jan 30, 2026
Last seen: Mar 2, 2026
Topics: 3 / Replies: 34
Reply
RE: Help needed to adjust weather compensation on Vaillant air source heat pump

@robert-m Hi Robert, your observations are similar to mine in terms that the temperature from the sensocomfort is regularly below the target temp. I ...

3 weeks ago
Reply
RE: Vaillant Tech Support Flagged Low DT: UFH Return Cold, Suspected Zero Flow

@bornagain Thanks for the comments and comparison with your own system. My understanding is that the flow rate should automatically adjust to provide...

3 weeks ago
Reply
RE: Vaillant Tech Support Flagged Low DT: UFH Return Cold, Suspected Zero Flow

Hi everyone, As I get to know my 3.5kW Aerotherm instal I have had a number of calls with Vaillant tech support. A recent call turned up info that t...

3 weeks ago
Reply
RE: Help needed to adjust weather compensation on Vaillant air source heat pump

Thanks for the posts and ref to the video - all of which largely reinforce what I believed I had understood and informed the way I have our system set...

3 weeks ago
Reply
RE: Need help maximising COP of 3.5kW Valiant Aerotherm heat pump

@jamespa Thanks for the commentary and reassuring comparisons with your own much larger system. The energy consumed of 281kWhrs produced heat of 893...

4 weeks ago
Reply
RE: Vaillant Tech Support Flagged Low DT: UFH Return Cold, Suspected Zero Flow

@editor thanks for the tips which I will try before calling my installer on Monday. Again much appreciated.

4 weeks ago
Reply
RE: Need help maximising COP of 3.5kW Valiant Aerotherm heat pump

Yield info for January. I live on a Scottish island.

4 weeks ago
Reply
RE: Need help maximising COP of 3.5kW Valiant Aerotherm heat pump

Thanks for requesting this info - I hadn’t seen this data before. Live and learn. Not sure if 1000 cycles is good or bad or period of measurement.

4 weeks ago
Reply
RE: Vaillant Tech Support Flagged Low DT: UFH Return Cold, Suspected Zero Flow

Update - I have been checking the UFH return manifold, waiting on a rise in temperature. Response was fairly slow so I figured the heat was being abs...

4 weeks ago
Reply
RE: Vaillant Tech Support Flagged Low DT: UFH Return Cold, Suspected Zero Flow

@steelbadger yes, HP running “normally” and, if you have seen some of my other thread, I have no stove burning. I have the system in active mode - so...

4 weeks ago
Page 2 / 4
Share:

Join Us!

Latest Posts

Click to access the login or register cheese
x  Powerful Protection for WordPress, from Shield Security PRO
This Site Is Protected By
Shield Security PRO