Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Oct 12, 2024
It did seem a bit odd that the rated flow rate was temperature dependent; 50.88 l/min at 35 degrees C flow temperature and 27.90 l/min at 55 degrees C...
What does your friend hope to achieve with the battery? Are they looking to store cheap rate energy and use it at peak hours? This might just about ma...
I see the battery as "doing the right thing" much like going for a heat pump. Being able to take off-peak electricity (Economy 7 tariff is looking the...
OK, I've now skimmed through the SEG rules per/p> Who can apply for a SEG tariff? 1.5. Applicants using the following technologies can req...
Indeed take no issue with getting approval to install generating equipment. Actually the online G99 approval process from UK Power Networks was automa...
If you are in good standing in the Octopus forums that would be helpful, thanks! I’m interested in the case is installing a battery but not through an...
If the equipment was installed after the FiT scheme ended they still need the paperwork as there is no other way to demonstrate the absence of FiT pay...
You'll need to have: A smart meter providing us with half-hourly readings A solar system with a maximum generation of 9 kWp (kilowatt peak) A co...
@mjr I feel you're somewhat missing the point I was making; I was trying to find out the reasoning behind such a rule, not determine whether they were...
Looks interesting, a joint Octopus/RED development, so it bodes well for efficiency of installation and operation respectively. Let us hope they achie...
Much like the Octopus Outgoing, there is an unfortunate requirement for MCS documentation; now sure why since the MCS certificates page states Pl...
It looks as if Graham has been busy playing around with a few different heat pumps; between his RED and the Samsung LN HT he had a Phnix R290 heat pum...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Why are ASHP installs so expensive?
Thanks. I am personally on the page of measuring house...
By JamesPa , 52 minutes ago
-
RE: Heat Pump deployment statistics: June 2026
To my eyes, sat behind all of this is a basic policy ma...
By Temperature_Gradient , 15 hours ago
-
Thank you @majordennisbloodnok – that means a lot, part...
By Mars , 19 hours ago
-
We’ve just passed 20 million forum views! 🎉
It's official. The Renewable Heating Hub forums have of...
By Mars , 19 hours ago
-
RE: Missing flow temperature in Heat Geek proposal
That calculation is reasonable, output is proportional ...
By JamesPa , 21 hours ago
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
Have you looked at the Nibe website? They list their ap...
By Lizzie , 22 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@batpred When the raw material input has increased in c...
By Papahuhu , 2 days ago
-
We kept ours and Heat Geek would have been in touch if ...
By Batpred , 3 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s I would encourage you to have a conversation ...
By Rob of York , 3 days ago
-
RE: Is it the house or the equipment?
Thanks @jamespa The last hard to fix draughts in the...
By springswood , 3 days ago
-
RE: Vaillant Arotherm – Using Heating
@l8again Mine is typically using 11w including the i...
By Batpred , 3 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you have a flowmeter and two temperature probes, the...
By bobflux , 3 days ago
-
RE: Siting of the external sensor on a heatpump
@jamespa Absolutely. Even if the same mistake was mad...
By Batpred , 4 days ago
-
SPONSORS
