Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Oct 12, 2024
I note that in Australia the outdoor cylinder arrangement is a thing (at least for hot-water); they, for the most part, have better weather, so the de...
I discovered the following website which looks promising for boosting radiator output. along with this youtube video. As a counterpoint, this y...
There is an interesting video on youtube from John Cantor (OpenEnergyMonitor and heatpumps.co.uk) driven off data in OpenEnergyMonitor (and presumably...
@morgan I found it to work OK outdoors (taking a few steps backwards), although the temperature range selection was a tad annoying if you got any clea...
Revisiting this thread, I'm taking a different route with inverter and battery location. Instead of under the stairs I've identified another location ...
As an alternative approach, a standalone thermal imaging camera might be worth a look. No questions about software compatibility and support. Somethin...
For the moisture inside the house? I suppose so. seems relevant!
I hate to be that person, but please do consider the vapour-openness of your walls. Sealing in the moisture with kingspan or a vapour barrier or even ...
Indeed I think I found out about hydronic plinth heaters from a website like this! I was hoping to avoid something "held together by tape" at thi...
I believe "carefully" is the word of the day. I stacked 16 of my batteries up in that pattern and came to about the same measurements. This gives me 1...
Yep, sorry for wasting your time with the uninformative photographs and description. Hopefully the following photo shows what I have to work with unde...
I'm back at home and have re-measured the under-stairs space at the back of the cupboard. It is approximately 670mm wide and 860mm high (well, the hei...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Why are ASHP installs so expensive?
Thanks. I am personally on the page of measuring house...
By JamesPa , 1 hour ago
-
RE: Heat Pump deployment statistics: June 2026
To my eyes, sat behind all of this is a basic policy ma...
By Temperature_Gradient , 15 hours ago
-
Thank you @majordennisbloodnok – that means a lot, part...
By Mars , 19 hours ago
-
We’ve just passed 20 million forum views! 🎉
It's official. The Renewable Heating Hub forums have of...
By Mars , 19 hours ago
-
RE: Missing flow temperature in Heat Geek proposal
That calculation is reasonable, output is proportional ...
By JamesPa , 21 hours ago
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
Have you looked at the Nibe website? They list their ap...
By Lizzie , 23 hours ago
-
RE: Who's your electricity provider and what's your tariff?
@batpred When the raw material input has increased in c...
By Papahuhu , 2 days ago
-
We kept ours and Heat Geek would have been in touch if ...
By Batpred , 3 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s I would encourage you to have a conversation ...
By Rob of York , 3 days ago
-
RE: Is it the house or the equipment?
Thanks @jamespa The last hard to fix draughts in the...
By springswood , 3 days ago
-
RE: Vaillant Arotherm – Using Heating
@l8again Mine is typically using 11w including the i...
By Batpred , 3 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you have a flowmeter and two temperature probes, the...
By bobflux , 3 days ago
-
RE: Siting of the external sensor on a heatpump
@jamespa Absolutely. Even if the same mistake was mad...
By Batpred , 4 days ago
-
SPONSORS
