Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering youāll be able to ask questions, join discussions, follow topics youāre interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Oct 23, 2025
@allyfish it does, but I'm going to have a go at programming the controller directly and turning off the hive control program š¤ I did try heating th...
Just had an answer from installer one controller is for heat only one is for hot water and heat so will try and program each accordingly and see what ...
It's funny how things come around but we are just about to have new windows installed and have been told that new regs are that they must now have ven...
@kev-m it has made a difference to my electricity use. I've probably tightened up too much on hot water requirements so will be looking at those setti...
I've been following this thread and have noticed a drop in consumption since applying WC, but still getting spikes although reducing the length of dhw...
I've literally just changed my 2 grant Aerona to default weather compensation to see if it makes a difference to consumption, thanks for advice given ...
@allyfish Thank you, I've learnt so much more I'm the last week than the time the ashp were installed. I'm assuming both pump adjustments would have...
@allyfish I've just seen this as just posted elsewhere whether to apply low tariff mode. As above complete novice to all this and still figuring stu...
There is a low tariff mode on the ashp. Has anyone used this or have any experience of it? The function is to heat any thermal stores and DHW cyli...
@allyfish Thanks for this useful info I'm only just getting to grips with my Aerona, and my installer also attached a hive thermostat. Does weather ...
@allyfish I'll have a look at this closer in daylight. Thank goodness for this forum for the questions I keep finding. I'm not sure where I stand ...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Adventures in heat loss calculations
Posted by: @cathoderay I'm not too worried about the ...
By Rob of York , 2 minutes ago
-
I bought it, read it, enjoyed it. Despite my earlier c...
By JamesPa , 3 hours ago
-
RE: Tell us about your Solar (PV) setup
Our PV set-up has moved over time. Warning this is a sh...
By Judith , 16 hours ago
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay @jamespa I've managed to get some nice re...
By Rob of York , 24 hours ago
-
RE: 7kW EV Charger Options Advice
Doh, not sure that I was thinking straight there, less ...
By Rusty , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
Iām really liking reading through this thread and the r...
By Judith , 1 day ago
-
Thank you @trebor12345
By rgabor , 1 day ago
-
Panasonic Free Multi Z and Etherea Internal units.
My prospective installers have suggested the Panasonic ...
By Toodles , 2 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Great. You just need to find a way of cranking up your...
By JamesPa , 2 days ago
-
RE: Heat Pumps Without Grants: Would You Have Installed One & Will You Now?
We had two heat pumps installed without Govt funding. H...
By Rob of York , 2 days ago
-
My Adapt is finally installed and running! Almost a yea...
By tomasmcguinness , 2 days ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 5 days ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 5 days ago
SPONSORS
