Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Aug 24, 2026
I agree incentives are needed. We are an unusual home but we still need an incentive to choose to not switch some appliances during peak times. @ju...
Thanks, this graph does show us that that critical ratio that can accelerate or delay the transition is not moving in the right direction. The on...
Thanks, so the consequence is Fogstar either do not know or did do not care enough to state it to me. My question was clear and I was not pushing for ...
Thanks for checking and sharing! It is odd that Fogstar advised differently, so either: they do not know how the Seplos BMS works they know, ...
@jancold I only discuss data.. Fogstar were not impressed.. 😉 Do you have any data from the pace BMS or Solis AI to share with us? If pos...
The answer from Fogstar was crisp. My hypothesis, supported by the graphs I shared, is that this particular data stream is being pre-processed by t...
I am always impressed with how you keep abreast of so many types of impact of electricity management policy on the real world of cabling and contracts...
Just to wrap this up here for future readers: The Solis S6 like other inverters is also not able to use set periods to gradually slow down the cha...
I agree. Fogstar confirmed that the Seplos BMS does not slow the charging down, so no worries. 🙂 The HA charts will help future readers ...
Thanks. It is not clear how @bash concluded the charging is being smoothed by the Seplos BMS. Also, I would need a config before I can check mine. ...
I would have not got it if it was that tight
At the moment, my HA is doing the monitoring job. I thought I would do the tedious job to compare all those parameters. 😆 Anyway, when you get...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: How Accurate Is My DIY Heat Loss Calculation?
Any idea how efficient your gas boiler is? Is it a 50 y...
By Old_Scientist , 2 hours ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 14 hours ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 1 day ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 2 days ago
-
RE: Who's your electricity provider and what's your tariff?
@chandykris Swings and Roundabouts, you win some…. ...
By Toodles , 2 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 2 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 2 days ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
There is scope for product development here. I for one...
By JamesPa , 2 days ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 3 days ago
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis, I’ve followed this thread pretty much from the...
By Mars , 6 days ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
First time poster here but I can share my experience as...
By SCH , 6 days ago
-
RE: Is it the house or the equipment?
...which, I've found out, is pretty much impossible to ...
By Majordennisbloodnok , 6 days ago
SPONSORS
