Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: May 31, 2026
We used to have an Indra V2G/H charger, and a leaf, got them in 2020 I think. We had the charger for 3 years, then gave it away as a spare - the comp...
On old (non inverter) compressors there’s sometimes a ‘start’ capacitor thats briefly put in series with a secondary coil, to encourage the compressor...
Like any electrical component, an SPD may fail. They're generally Metal Oxide Varisters (MOV), and over repeated high voltage spikes tend to slowly d...
Power limits are very common in France, typically 9kVA for a household, although anything from 3-36(3phase) is perhaps available. The higher the kVA ...
@transparent I do like the safety first precautionary approach. We could do with it in other aspects of life (PFC's, CO2 emissions...). I trust a ba...
@batpred Below is a simplified problematic RCD circuit I ‘found’. The trigger is the difference between L and N currents, which is then amplified u...
Thanks for the clear explanation @transparent. I think I agree with two sides of this issue: There is a risk that when a unidirectional rcbo/rcd tr...
The risk with an rcbo is that the cheap normal ones use a tiny transformer to create a signal if there is a difference in current between L and N cabl...
A blower door test typically pressurises the home to +/-50Pa relative to outside, and measures the airflow required to achieve this in m^3/hour. Usin...
The underground gas pipes near us are all being replaced, with our street around the time we removed it from our house altogether! I think the gas...
I think home batteries are now very inexpensive, £1000 will get you 16kWh from Aliexpress - I expect +shipping, £1400 all in price from fogstar in the...
Octopus removed our gas meter for free a couple of years ago - leaving a capped plastic pipe sticking out of the ground inside the old meter box. I k...
- 27 Forums
- 2,794 Topics
- 66.1 K Posts
- 3,435 Online
- 7,198 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: How quickly would you want/expect heat recovery to take from setback?
@toodles Also, in my case, in some rooms I have the LSV...
By AndrewJ , 8 minutes ago
-
RE: Renewables & Heat Pumps in the News
@majordennisbloodnok Best we keep that trident well pol...
By Toodles , 2 hours ago
-
RE: Renewable Heating Hub Homeowners' Q&A Podcast
Come for the low-carbon homes. Stay for George Clarke’s...
By Mars , 1 day ago
-
RE: Octopus Cosy 12 Heat Pump Regret: Incredibly Loud, Poor Heating & Constant Hum - Help!
@razz, as we head into the heating season, I just wante...
By Mars , 1 day ago
-
RE: How should the Boiler Upgrade Scheme be reformed?
Not quite, regular A2W heat-pumps need a load of extra ...
By Temperature_Gradient , 3 days ago
-
RE: Heat Geek installations: share your experiences
one thing i learnt from reading people’s comments and e...
By Batpred , 3 days ago
-
RE: Cooling/heating with one unit
"The way we use A2A on a cheap overnight EV tariff is t...
By mrkfm , 3 days ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
We have ‘signed on the dotted line’ today for a Panason...
By Toodles , 3 days ago
-
RE: Heat pump branding. Clever, contemporary… or a bit too much?
...or it was there and was lost thanks to laziness and ...
By Majordennisbloodnok , 3 days ago
-
@bobflux Thank you for your response. I am trying to ...
By RonV. , 3 days ago
-
Bufferless design & control of Chinese air to water monoblock hybrid heat pump in Alberta, Canada
This post is about how I successfully configured a buff...
By Tony.Stolz , 3 days ago
-
The installer visited yesterday and suggested the noise...
By JamesChatz , 3 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Your house sounds a lot like mine. 2 surveyors each sp...
By JamesPa , 3 days ago
-
RE: Heat Geek Zero Disrupt: Are We Sleepwalking Into Another Race to the Bottom?
Thats true only if you do the wrong experiment. Done c...
By JamesPa , 3 days ago



