Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 15, 2026
Would you like me to remind you of the very first point I made on page-1 of this topic?There is a statutory requirement for you to be supplied with th...
Apologies. I forgot you're in Ireland.So the Bright App route probably won't work either. FYI the original spec for the Smart Meters used in the UK ...
If "it" was going wrong at 23:30 then you should be able to see the electricity usage on data collected by your Energy Supplier sometime after midnigh...
I'm not the best person to answer that @newhouse87 I'm not a heat pump specialist.I work with embedded controllers, sensors, feedback systems and th...
Given that Daikin are an international company, I think the LCD display isn't using British nomenclature. I think the 3-way valve reference to SHC i...
Like any other domestic 'frost-stat', the BUH temperature system is there to protect your pipes from freezing. It has no concept of whether 'heat is...
I don't expect they'll use more than 1 temp sensor on the outside unit. Look at your graph.There are three areas of interest The red sector is c...
Well I'm guessing that the temp sensor is positioned where it has access to the surrounding air, but isn't within the air-stream which gets drawn thro...
This joke's on me. It's often the case that I use a 3D printer to create a few components needed for an 'energy project'. These can sometimes take...
The actual outside temperature might not be below freezing...... but the heat-pump controller thinks it is.That's what triggers the BUH. Why not jus...
Disabling a feature could just be masking a poor solder joint in a connection to a sensor! Wouldn't it be better to narrow down the search first bef...
Whatever we're looking for is an intermittent fault.It occurs, and then goes away. If you look at the display a few hours later, everything might ap...
- 27 Forums
- 2,768 Topics
- 65.2 K Posts
- 1,610 Online
- 7,170 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Why are ASHP installs so expensive?
The concept of one agency doing the heat loss survey an...
By ian33a , 1 hour ago
-
RE: Who's your electricity provider and what's your tariff?
@batpred When the raw material input has increased in c...
By Papahuhu , 15 hours ago
-
We kept ours and Heat Geek would have been in touch if ...
By Batpred , 20 hours ago
-
RE: Missing flow temperature in Heat Geek proposal
The Heat geek contract had various get-out clauses with...
By Batpred , 22 hours ago
-
RE: Starting Our Heat Pump Journey: 1962 build 3 bed detached house
@ian-s I would encourage you to have a conversation ...
By Rob of York , 1 day ago
-
RE: Is it the house or the equipment?
Thanks @jamespa The last hard to fix draughts in the...
By springswood , 1 day ago
-
RE: Vaillant Arotherm – Using Heating
@l8again Mine is typically using 11w including the i...
By Batpred , 1 day ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
If you have a flowmeter and two temperature probes, the...
By bobflux , 2 days ago
-
RE: Siting of the external sensor on a heatpump
@jamespa Absolutely. Even if the same mistake was mad...
By Batpred , 2 days ago
-
-
RE: Recommendations in Ely (Cambs) area for Full setup checks on Nibe HP setup for House.
In fairness all heating has cost a lot to run in recent...
By JamesPa , 3 days ago
-
RE: Navigating the World of Refrigerants In Heat Pumps: A Guide for Homeowners
Indeed we are invvestigating AC at present and are havi...
By Toodles , 4 days ago
-
RE: Daikin ESPAltherma and Home Assistant installation
It's laziness lol The PV system is very chatty, meter...
By bobflux , 5 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
R (The R Project for Statistical Computing, I use it wi...
By cathodeRay , 5 days ago



