Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 11, 2026
@david999 - Firstly, please note that the responses you are getting in this forum topic about your installation can be used as evidence in any dispute...
As you're an engineer, you'll probably want to devise a way of holding down the centre of those panels until your installer arrives next week. 'Ere ...
Here's a photo of a single PV-panel, wall-mounted. Firstly, note the spacing of the horizontal rails behind the panel. Secondly, you'll realise ...
@david999 have a look at the Fastensol manual I linked earlier. Note that there are two types of panel clamp end-clamp mid-clamp The la...
No, that's not correct @david999 The mounting bars shouldn't be placed along the top & bottom of the PV panels, but inset so that the clamps are...
As others might come across this topic in future, may I chip in and mention a two-room solution? I was once faced with the need to draw in fresh air...
Will you be manually setting up the schedule for charging from the grid @pressure ? Or has GivEnergy inserted Octopus' API within their control soft...
Any plans like this will need to take more account of what's going to happen to energy strategy in the future.Almost everything I'm currently working ...
That's a very important observation. It's such a mess of components and pipes, I'm at a loss to understand how this might relate to any form of 'sys...
I have recently posted a series of explanations regarding 'missing readings' over on the topic about Smart Meter Installation... potential nightmare. ...
Responding to both @blott and @guthrie... I'm unable to comment on the different types of vertical turbine.Although I've read extensively about the ...
In theory that might be the case. But once the house insurers add it to their list of questions, we are likely to find compliance with PAS-63100-202...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Siting of the external sensor on a heatpump
It wouldn't be my first go-to suggestion for most peopl...
By Majordennisbloodnok , 21 minutes ago
-
RE: Daikin ESPAltherma and Home Assistant installation
@majordennisbloodnok Over the last few days ...
By Bash , 24 minutes ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
@judith Thanks very much for this! My room by room calc...
By jon , 15 hours ago
-
RE: Vaillant Arotherm Plus 7KW need a service on it
I think that is outrageous even if I suspect not unique...
By Batpred , 15 hours ago
-
RE: Two heating zones to one zone
@transparent Many thanks. The garage is fairly well ...
By Profzarkov , 19 hours ago
-
RE: Vaillant Aurotherm - Heater Wire Position
Ah, good point. I need to check if this was installed i...
By Batpred , 1 day ago
-
RE: Adventures in heat loss calculations
Posted by: @jamespa At this point its probably worth...
By Rob of York , 1 day ago
-
@batpred thanks for getting a copy. Appreciate the supp...
By Mars , 1 day ago
-
RE: Tell us about your Solar (PV) setup
We have a 6.56kW solar PV system (16x 410W panels) inst...
By Rob of York , 2 days ago
-
RE: Where heat loss surveys seem to go against practical reality
@cathoderay @jamespa I've managed to get some nice re...
By Rob of York , 3 days ago
-
RE: 7kW EV Charger Options Advice
Doh, not sure that I was thinking straight there, less ...
By Rusty , 3 days ago
-
Thank you @trebor12345
By rgabor , 3 days ago
-
Panasonic Free Multi Z and Etherea Internal units.
My prospective installers have suggested the Panasonic ...
By Toodles , 4 days ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
Great. You just need to find a way of cranking up your...
By JamesPa , 4 days ago
SPONSORS
