Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jul 8, 2026
@johnnyb I have had Homely adjust the maximum temperature for my Daikin to 50 as 45 just didn’t cope at -7 degrees. I would imagine that the 45 would ...
@papahuhu All’s well that ends well😊
@papahuhu It is the infamous ‘Have you tried turning it off and on again Sir?’ 😳 Glad to hear that things are working properly at long last th...
!!!Correction!!! The flow temperature is controlled by Daikin controls and I note that the flow rate is stepped (again by Daikin control) and appear...
@johnnyb In conversation with a Homely technician some time back, I was told that Homely does not control the flow temperature (we were discussing my ...
@papahuhu ‘72’???!!! Being an all electric household here, I have great difficulty in rustling up enough oil for the lamps of the 3 wise virgins alone...
@l8again 😱 Fortunately, the readership of this forum are Nause and Savvy rich and care about consumption!😉 Toodles.
@papahuhu I’m hoping to see some improvements and possibly greater flexibility in the next iteration of Homely firmware; I think my kit fell into the ...
@papahuhu My experience of Smart+ was that though this category added a few extra options, it did nothing to allow greater individual control of the h...
@papahuhu The hang-up was not the Heat Pump side of things but the ginourimity of the water tank as required for a 4 bedroomed house. The Sunamp Therm...
@papahuhu Err, no I haven’t! I suspect that this may be linked with ‘Polling’ and perhaps @majordennisbloodnok may be able to throw more light on this...
@editor I suspect that a more significant risk with regard to R290 possibly leaking from a system relates to the likelihood of any insurance policy be...
- 26 Forums
- 2,702 Topics
- 63.4 K Posts
- 414 Online
- 7,109 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Home Alone with Home Assistant (previously A Beginner's Guide to ASHP Monitoring)
I should also add that I have several automations for v...
By Majordennisbloodnok , 16 minutes ago
-
RE: Electricity price predictions
@batpred Didn’t feel like failure to me a couple a mont...
By Papahuhu , 1 hour ago
-
RE: Consultation on reform of Consumer Protection in the retrofit market
I would further add that there will likely be a fair nu...
By JamesPa , 2 hours ago
-
RE: Heat Pump Servicing & Maintenance – Good Value or Rip-Off?
@unsure Thanks. Yes, if it weren’t for the warranty I w...
By Papahuhu , 3 hours ago
-
RE: Air to air bus grant installer anywhere
Perhaps MCS needs to change and support the industry?
By JamesPa , 3 hours ago
-
RE: Surface mount or bury primaries for heat pump installation?
@tomasmcguinness Spot on
By pash44pump , 5 hours ago
-
RE: Design Of Cascade System Replacing Undersized ASHP
Thanks for your reply. Answers to the questions you rai...
By pash44pump , 5 hours ago
-
RE: Electrification and Independent Hot Water Systems Request for Knowledge
Are your neighbours units specifically designed for coa...
By Singlespeed , 6 hours ago
-
RE: Can DNO change a G99 export allowance once approved?
Correct, when you apply under G99 the DNO will make you...
By Old_Scientist , 6 hours ago
-
RE: GivEnergy inverter tripping due to over-voltage?
@transparent Your effort is massively appreciated, not ...
By fleecy , 7 hours ago
-
RE: SolarEdge SE5000H Inverter Failure
Installed inside a garage. Installation date September ...
By L8Again , 9 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Forum Handle: GotGordon Manufacturer: Samsun...
By Gotgordon , 2 days ago
-
RE: Summer heat is becoming the new winter cold in the UK. What are you doing about it?
@ian33a I am not easy with sleep either unfortunately…....
By MK4 , 2 days ago



