Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Oct 28, 2026
Thank you Julian; I’ll look amongst my documents for this and follow it up via that route. Regards, Toodles.
Thank you, even when the site is not ‘down’ I don’t think it is functioning properly as the first question I am asked when opening the site from my Da...
@julianc Thank you Julian, I’ll try again and see if the Stand by Me site will accept my application; I do recall going through such a procedure but s...
Hello Julian, having recently purchased a Daikin ASHP, I wish to do the same and filled in the on-line application to Daikin to know about all the opt...
The ones I discussed the subject with did - but did not rate them highly for all that! Regards, Toodles.
And going back to the very informative article ‘ ‘10 Things To Consider When Choosing Pipe Insulation Thickness ’ I would class the ‘heat loss’ in ...
Noise and vibration transference concerned me greatly - though I could see that even if vibration problems * could be negated (and I doubt how effecti...
Regarding the external pipe-run, I did attempt to have as short a run as possible to reduce losses; I wanted to install the ASHP much closer to the ai...
Sorry, I didn’t see the final comment about the compliance with buildings regs and insulation of pipes.The DHW system is a totally separate system and...
@transparent Thank you, I’ll take up the matter of insulating the brass valves with the installer, the ties are holding an electrical ‘trunking’ that ...
And finally, the airing cupboard, overall, the system is very quiet and the only sound heard from any internal components is a faint pump noise if lis...
More photos of the lagged pipework. Regards, Toodles
- 27 Forums
- 2,806 Topics
- 66.3 K Posts
- 2,926 Online
- 7,209 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: The good, the bad and the not that great – my heat pump installation
@burtis Thanks for posting this and Im so pleased you ...
By JamesPa , 1 hour ago
-
RE: I need help with Ecodan ASHP
@f1p It turns out there have been a solar panel install...
By Andris , 13 hours ago
-
RE: 15kw pump for 225m2 1990's house - over kill?
@seaviews your installer would be right to say that the...
By GrahamF , 13 hours ago
-
RE: Vaillant ecoTEC Plus - Flow Temp and Set Up
@trebor12345 That curve looks healthy to me. I woul...
By JamesPa , 15 hours ago
-
RE: Tradespeople on Their Phones: What’s Acceptable When They’re Working in Your Home?
Actually, that's a very important point. I've only ev...
By Majordennisbloodnok , 22 hours ago
-
RE: The Changing Jet Stream Could Challenge UK Air Source Heat Pumps
@susannasaunders can I just add to @rob-of-york s comm...
By JamesPa , 1 day ago
-
RE: Aerotherm and weather compensation
These are likely inked. The basic explanation is tha...
By JamesPa , 1 day ago
-
RE: Electrical works for air to air heat pump
agree with above. I have not had extra costs added wh...
By Batpred , 1 day ago
-
Good to hear that you found a solution. Absolutely a...
By Batpred , 1 day ago
-
RE: Are there any comparisons of DHW heat stores around?
@sarahemmm I have done things the opposite way round I ...
By Toodles , 2 days ago
-
RE: How will removing the standing charge on gas bills benefit heat pumps?
The BUS grant funding for 2026/27 will run out at the c...
By Rob of York , 3 days ago
-
-
RE: Say hello and introduce yourself
@e-a-west as the good Major said, welcome to the forums...
By Mars , 5 days ago
-
RE: How much of your renewable and home setup would still work if the internet went down?
Yes I actually have a copy of a tool that whenever a ce...
By EtchedPixels , 5 days ago


