Last seen: Dec 3, 2023
found this "NOT for use in single feed indirect cylinders Environmental" so the Inhibitor should not be used in ASHP with Cyclinders.
i've just found this good YT video that explains a lot and shows a vessel in horizonal orientation...
@transparent thanks for the post! Mine is connected to the combination valve which sipplies the cold feed to the DHW tank and balanced cold to the h...
@mike-patrick yes i get you, I too seem to know far more than any of the installers that have attended site. I would urge everyone to contact the MCS...
Correction, it should say saving of over 540KW per year just by pushing in the probe - as i have HW heat 3 x per day
Bit of an old thread but this is the way i am planning to use my iboost in case it helps anyone. I have a Daikin Mono and third party cylinder. I ...
1) Do you know what you are doing? 2) Do you really know what you are doing? 3) By installing it there will it fulfil planning permission, buildin...
- 26 Forums
- 2,275 Topics
- 50.9 K Posts
- 164 Online
- 5,936 Members
Join Us!
Podcast Picks
Latest Posts
-
RE: Aira Heat Pump: Stylish Scandinavian Heating
It is, of course, for you to decide on your situation. ...
By Majordennisbloodnok , 46 minutes ago
-
RE: When to use Octopus Intelligent Go tariff with my heat pump and battery
@treewizard Very interesting, thanks - although I hav...
By GrahamF , 10 hours ago
-
RE: My DIY Heat Pump installation
…and I’m assuming the “more” option on the right of the...
By Majordennisbloodnok , 10 hours ago
-
RE: Who's your electricity provider and what's your tariff?
So I’m still with E.ON Next, and I received a pretty sn...
By Mars , 11 hours ago
-
RE: Heat Loss v Outside Air Temperature
I think this can be dealt with without the need for OAT...
By JamesPa , 11 hours ago
-
RE: First time wall mounting an ASHP
what you need to do is everything you can to remove the...
By ASHP-BOBBA , 12 hours ago
-
RE: Air source heat pump roll call – what heat pump brand and model do you have?
Aira 12kW - @gmuzz
By Gmuzz , 12 hours ago
-
RE: Grant 13kW Aerona3 - issues getting zones to temp
ASHP switched off per specialists guidance. Seems the b...
By Crimson , 13 hours ago
-
RE: Faulty Clivet heat pump out of the box
@steveimpey that is disappointing. I am inclined to agr...
By benson , 15 hours ago
-
RE: Octopus Cosy Heat Pump Owners & Discussion Thread
@andrewj Bear with me, this is my first post on this fo...
By KevH , 16 hours ago
-
RE: Are We Sleepwalking Into Another Race to the Bottom?
Is the ZD is a bit of a marketing ploy? has the it bee...
By BWood , 20 hours ago
-
For anyone interested in levelling up their understandi...
By Mars , 21 hours ago
-
RE: Solar panels on side of house to heat water
Thankyou for the brain dump, all very worthy items. W...
By paultheheating , 21 hours ago
-
Ecodan HW temp setting set itself to 40C
This morning I noticed that the HW was lukewarm and MEL...
By downfield , 22 hours ago
-
RE: Is Your House Warmer Upstairs Than Downstairs?
I suspect its mainly that you get the views. Upstairs...
By JamesPa , 22 hours ago
-
RE: Mitsubishi Ecodan FTC7 Legionella date set
The next run date/time is determined by the settings co...
By F1p , 24 hours ago
-
@treewizard is this not the electrical pulse that keeps...
By ASHP-BOBBA , 1 day ago
-
RE: Samsung Gen6 and Havenwise ........
I am no expert on this but on your gen 6 controller onc...
By Alfapat , 2 days ago
-
RE: Help me keep the faith with my air source heat pump installation
@adamk these are called roll top rads, they were still ...
By AgentGeorge , 2 days ago
-
If the Vaillant is a 7kw unit I’d avoid. Quiet outside ...
By AdamK , 2 days ago


