Last seen: Feb 26, 2023
@derek-m thanks for this - really appreciated. The leak is I think behind a kitchen unit - it's in a really difficult place I looked but cant see any...
no - not the legionella cycle and yesterday it was back to the previous pattern - dhw being heated to over 60*C without any input from the heat pump. ...
@kev-m Hi Kev - thanks for the response. I think it was the tank that got to 70*C - was using the graphs pls see attached the first one shows the...
Morning all - turning to the forum again in case anyone can assist - grateful for any advice. This week my dhw temp soared to 70*C. It is set to heat ...
@justinsb - Sorry to hear you were having hassles - went off and checked mine - don't think it looks like same thing happening. All - as ever thank...
@justinsb have been taking readings for a while now for exactly same reasons you say. As others have said it's pretty crazy to have to give a heating ...
@derek-m I think today's energy consumption data becomes available tomorrow I'll post that then thanks.
Here's a snapshot of today - changes made at 10am. Will leave interpretation to others! Need to see over next couple of days how it affects house temp...
@justinsb thanks - will take that on board and interested to know how you get on with your curve given some of the similarities between set ups we hav...
@derek-m understood and thanks for the tip. The thermostats are old style dials with notches on so not quite as easy to calibrate as digital read out ...
Update from things at my end. Made my first changes to the set up. DHW settings lowered to 47*. Switched to the weather compensation on saturday. Real...
- 26 Forums
- 2,342 Topics
- 53 K Posts
- 262 Online
- 6,000 Members
Join Us!
Worth Watching
Latest Posts
-
RE: Setback savings - fact or fiction?
I apologise that I have been silent on this for a while...
By JamesPa , 1 hour ago
-
RE: Poll for Time of Use, tariffs, technology
We made this work (2 day protection can be reassuring)....
By Batpred , 2 hours ago
-
And arguably even more important, sodium will be hopefu...
By Batpred , 2 hours ago
-
RE: LiFePO4 lithium battery fires and explosions
All players would normally be expected to be transparen...
By Batpred , 3 hours ago
-
RE: Free Ecoheat Heat Pump Install
@deltona Rings just about every alarm bell going. Wal...
By bontwoody , 4 hours ago
-
RE: MELcloud scheduling misbehaviour
@davidalgarve I didn't stay on AA for long because it s...
By downfield , 13 hours ago
-
RE: A Smarter Smart Controller from Homely?
I've been thinking of emailing Homely to ask for a few ...
By JohnnyB , 15 hours ago
-
Max output of Heat pump (Daikin 4Kw EDLA04)
Hello, I am a bit puzzled that according to pcdb tes...
By GeorgeA , 15 hours ago
-
In that case, @technogeek, I’d sign up for the free sol...
By Majordennisbloodnok , 16 hours ago
-
RE: Has Anyone Else Noticed a Decline in Tradesmanship?
@cathoderay Hence my rider about ‘all else being equal’...
By Toodles , 16 hours ago
-
RE: Heat Pump Performance Analysis Web App using Modbus Data
@redzer_irl — all my heat pump data is in csv files, me...
By cathodeRay , 17 hours ago
-
That’s not a problem. If you can hit the main landing p...
By Majordennisbloodnok , 17 hours ago
-
RE: Configuration issues with 10kW Midea R32 heat pump
@benson I believe there are quite a few of these instal...
By Toodles , 17 hours ago
-
RE: 10kw heat pump run in 24*7 data?
I would say you most likely do need 10kW. My gas consu...
By JamesPa , 17 hours ago
-
RE: Mitsubishi Ecodan 11kw Defrosting Issue.
@thundermink I managed to find the fault. I did it a lo...
By meehow , 18 hours ago
-
RE: Here is my heat pump installation with questionable COP in Italy
Well in Italy there is nothing controlling the quality ...
By materox345 , 19 hours ago
-
RE: What a Bad Heat Pump Installation Looks Like
@editor The trick to an inside unit installation is to ...
By MikeFl , 1 day ago
-
RE: Different dT on each radiator?
The way heating systems are designed will result in rou...
By JamesPa , 2 days ago
-
RE: Homely for Daikin Altherma 3 - Petersfield Area
@russ If you would care to pose your questions on one o...
By Toodles , 2 days ago

