Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Feb 26, 2023
@derek-m 300mm I had the same issue. If the EPC states that insulation should be improved then you can't claim RHI - so I had to make some improvement...
@peterr for comparison our usage was as follows: Actual meter reading - total kwh for Nov: 1514kwh Estimated use in NOv before asap based on previ...
@batalto Thanks this is really useful - I'll give myself a bit of time with this and have a go this evening thanks. Unless interrupted - just ha...
@derek-m Thanks for this. Our RTC is actually in the loft rather than one of our rooms - does that alter the advice in any way?
@batalto thanks for this - ok will have a go this evening using the youtube instructions - also just need to try and understand how it is set now so c...
@derek-m thanks I've seen the videos I'll have a go at weather comp this evening. Can I just check that you think that is best option alongside our sy...
@derek-m Hi Derek - happy birthday and is this the RTC? As always thanks for any help.
@peterr @kev-m just to contribute as a fellow 14kw ecodan user here are my figures for the same period 1-18th Nov. 533kwh heating, 88kwh hot water. ...
@kev-m Hi Kev been following your comments as knew you had same ecodan. Thanks for responding. We have ufh not radiators. We replaced a boiler base...
@derek-m Hi Derek Not got to grips with controller yet, I work away so not much time but keeping close eye on melcloud data. Saw @justinsb talking a...
@batalto thanks - weather comp not on yet - will start to look at this when home in a weeks time.
@justinsb @kev-m @derek-m Hi all - we're about six weeks into our ASHP install - ecodan 14kw. We've got a flow temp of 40* and cop ranges from 2...
- 27 Forums
- 2,758 Topics
- 64.9 K Posts
- 1,752 Online
- 7,162 Members
Join Us!
Installer Finder
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
I am amazed that there is not something out there to me...
By JamesPa , 4 hours ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 9 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 15 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 1 day ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 1 day ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 2 days ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 4 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 5 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 6 days ago



