Last seen: May 19, 2025
We’ve had a few cold night now. Some nights ranging from 3 at 8pm dropping to -3 overnight and still at -1 at 9am the following morning. it struggl...
This brings me too much satisfaction.
Thanks Ally 👍
We had our first frost proper air frost night last night since the install and all good. I noticed a new icon on the controller indicating the externa...
Here’s the house after garage built last year. it has underfloor all downstairs. 8 rads upstairs.3 additional rads upstairs in the garage. on the ...
@johnmo I think it’s fairly big. house itself is 294sqm. Year 1 all good. There had been a debate about whether to install 13kW or 17kW model but w...
@judith hi Judith. The house is 8 years old and well insulated. The volumiser is also very well insulated. I doubt I would feel it hot to the t...
That’s the volumiser now been retrofitted. Took them 2 hours.
@derek-m I had tried just turning off at the display power button but that didn’t work and I was panicking as we’re about to have the external volumis...
@derek-m it worked. Thank you 🙏
@johnmo thanks john, I have the manual in front of me.
@derek-m not yet. will try that.
Latest Posts
-
RE: DESNZ doing a survey which asks the right questions!
Interesting update, we were audited by Ofgem on Friday ...
By ASHP-BOBBA , 9 hours ago
-
RE: Samsung Gen 6 - Schedules not working
@old_scientist Yes they are. Ive found a detailed discu...
By bontwoody , 12 hours ago
-
It seems to me that the key metrics on which to compare...
By JamesPa , 12 hours ago
-
RE: Large heat pump options for church building
@josephiah Hi, we just completed a Church but using air...
By ASHP-BOBBA , 16 hours ago
-
RE: Moving FIT array onto a Tesla Powerwall 3 possible?
I know batteries and PV are DC! (& I have a Physics...
By Judith , 16 hours ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
The logic currently changes the max flow temp setting v...
By Grantmethestrength , 18 hours ago
-
RE: Which thermostat should I get (or do I need one?)
OK. It may be best to run it through the wint...
By JamesPa , 19 hours ago
-
RE: Samsung 5kW R32 Monobloc Gen 6 ASHP
Hi @Nick Owens, welcome to the forum. My Sam...
By Old_Scientist , 20 hours ago
-
RE: Heat Pump Installers: Competence, Illusion and the Hard Truth Homeowners Must Face
Some interesting comments here on buildhub. If SimonD ...
By JamesPa , 21 hours ago
-
Heat pump and wifi kit connection.
Currently trying to connect my Samsung MIM-B19N board t...
By Alfapat , 21 hours ago
-
RE: Heat Pump + Tado Setup: Smarter Control for Secondary Pumps?
I suspect this is one for @pirate-rich
By Mars , 22 hours ago
-
RE: Seal the Deal: Don't Let Your Heat Pump Leak Energy
Yuck, yuck and more! Others have pointed out lots alr...
By Judith , 23 hours ago
-
RE: DNO export limit problems.
So you're planning to add a PW3 to the existing setup (...
By Old_Scientist , 1 day ago
-
RE: Do I just go with the lowest quote for my heat pump?
@toodles I have electric pet blankets 🙄 If req...
By Jancold , 1 day ago
-
RE: Flexi-Orb Heat Pump Scheme: A Game-Changer for the UK's Heat Pump Industry
Signed
By Judith , 1 day ago
-
@drei just a small detail on your table posted on the 2...
By Judith , 1 day ago
-
RE: Say hello and introduce yourself
I've started a topic in the Heating Alternatives sub-fo...
By wully , 2 days ago
-
@toodles Im trying my best but it is getting a tad tedi...
By bontwoody , 2 days ago
