Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: May 19, 2025
@grantmethestrength Very interesting, thank you. I would very glad of those resources. I haven’t built any AI agents yet but I have used it to buil...
@johnmo aye alright John. I said we shall see, didn’t I? Of course we are sceptical but AI has improved a lot and improving constantly, especially the...
@editor over the last few months I have been using it for lots of things. It guided me very easily through converting the unused coax cable in my hous...
@wreckguru that’s the other part I can’t get my head around.
That is beyond belief. It’s looks like he has put a council bin outside his house! Neighbours must be fuming.
@jamespa yep, that’s my understanding. It might discharge for a bit when full and top up a little and with DoD of 90% I will prob get 10ish from a 6 h...
@tim441 got you now. Thank you. I have 10kW batteries and they charge at about 2.1kWh, so the 6 hours overnight 7p rate should be just about ok for...
@jamespa thanks James. I’d be installing a Zappi (already have an Eddi) as it seems to be compatible with both Octopus and the car (BMW i4). And th...
@jamespa thanks James. Makes sense and charging the battery overnight at 7p per hour would be a nice bonus but not the be all and end all. i get ...
@tim441 hi Tim. It’s a 5KW inverter but if I’m understanding things correctly that shouldn’t be an issue as I want to charge the car, power the house/...
This is a really interesting thread. Could I get some thoughts from the sharp minds here on my scenario? 13kW Grant ASHP with additional 3kW immers...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Where heat loss surveys seem to go against practical reality
It's an enticing idea, but the problem is knowing the o...
By cathodeRay , 6 minutes ago
-
RE: Next steps on my ASHP journey: Radiators and Pipework
@bobflux The hydraulic simulator is very interesting...
By Rob of York , 3 hours ago
-
RE: 7kW EV Charger Options Advice
Thanks. Yes, we have patchy 4G. The only option we had ...
By Rusty , 8 hours ago
-
-
RE: Being screwed over by Volkswagen Audi Group
Thanks, @batpred. That integration is the one I have in...
By Majordennisbloodnok , 23 hours ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@batpred I suspect it will be more this year. I had 9 ...
By AndrewJ , 23 hours ago
-
RE: Surface mount or bury primaries for heat pump installation?
@jamespa It's rusting 🙂
By tomasmcguinness , 1 day ago
-
RE: Glass lined Cylinder for private water supply
Thank you, once again, for your replies. Yes...
By ian33a , 1 day ago
-
It’s been out a few days and Amazon has already attache...
By Mars , 1 day ago
-
RE: Missing flow temperature in Heat Geek proposal
Yes, and this is another point I agree. We did find a f...
By Batpred , 1 day ago
-
RE: Problems with sizing a replacement for a Viessmann Vitocal 200-S
A very good point. In effect, the DHW pipework is an em...
By cathodeRay , 2 days ago
-
RE: Solar Power Output – Let’s Compare Generation Figures
@tim441 Here are those same three month periods for 202...
By Toodles , 3 days ago
-
RE: Adding additional Solar Panels to a DC coupled battery system
@transparent thank you for your reply above. As alway...
By Old_Scientist , 4 days ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 6 days ago
SPONSORS
