Last seen: Feb 4, 2025
Much appreciated for your help and thoughts. I will keep a diary. Thank you again
@jamespa At those times on the 6/7th Frost protection kicked in. The two flow temperatures are the starting and ending for the frost protection per...
Many thanks attached some diary notes containing that information. Thanks again for your thoughts and assistance
@jamespa From the vwz indoor controller, then looking at the live monitor. I have been playing with settings and did think I hopefully resol...
Many thanks for this much appreciated. The minimum flow temperature is 15oC. The set back mode is eco, but thinking moving to normal, to see if fro...
@jamespa Yes the house is warm enough so no call for heating. So when the outside temperature falls below 8oC, the HP will kick in and elevate the...
Hi James Frost protection is the mode to prevent the water in the pipes from freezing (no glycol). Vaillant also have the De-icing mode to clear t...
Latest Posts
-
RE: Large heat pump options for church building
Hi Mars thanks for the mention. Church projects are n...
By Aventus Eco , 22 seconds ago
-
RE: Heat Pump Installers: Competence, Illusion and the Hard Truth Homeowners Must Face
Agreed. There’s tricky, and then there’s diving into a ...
By Mars , 6 minutes ago
-
RE: Why Air Release Valves and Deaerators are Non-Negotiable
I have one installed when my heat pump was done, connec...
By JamesPa , 13 minutes ago
-
RE: RDSAP10 effect on existing heat pump EPC rating?
@mike-patrick fo you use ChatGPT? Could be worth a conv...
By Tim441 , 21 minutes ago
-
RE: Help me keep the faith with my air source heat pump installation
@dgclimatecontrol yes the wall fixings are mostly aroun...
By AdamK , 10 hours ago
-
RE: Rodents! A word of warning for heat pump owners
@lucia, I hear you on the lagging and insulation front....
By Mars , 11 hours ago
-
@majordennisbloodnok And of course, ‘No deliveries betw...
By Toodles , 16 hours ago
-
RE: Do I just go with the lowest quote for my heat pump?
@jancold 😆 Toodles.
By Toodles , 19 hours ago
-
RE: Moving FIT array onto a Tesla Powerwall 3 possible?
@judith The PW3 can accept AC or DC inputs. Regards, To...
By Toodles , 19 hours ago
-
RE: DESNZ doing a survey which asks the right questions!
Its great to hear of your approach and success with the...
By JamesPa , 24 hours ago
-
RE: Samsung Gen 6 - Schedules not working
@old_scientist Yes they are. Ive found a detailed discu...
By bontwoody , 2 days ago
-
RE: Testing new controls/monitoring for Midea Clone ASHP
The logic currently changes the max flow temp setting v...
By Grantmethestrength , 2 days ago
-
RE: Which thermostat should I get (or do I need one?)
OK. It may be best to run it through the wint...
By JamesPa , 2 days ago
-
RE: Samsung 5kW R32 Monobloc Gen 6 ASHP
Hi @Nick Owens, welcome to the forum. My Sam...
By Old_Scientist , 2 days ago
-
Heat pump and wifi kit connection.
Currently trying to connect my Samsung MIM-B19N board t...
By Alfapat , 2 days ago
-
RE: Heat Pump + Tado Setup: Smarter Control for Secondary Pumps?
I suspect this is one for @pirate-rich
By Mars , 2 days ago
-
RE: Seal the Deal: Don't Let Your Heat Pump Leak Energy
Yuck, yuck and more! Others have pointed out lots alr...
By Judith , 2 days ago
