Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Sep 19, 2024
@cathoderay A quick question. Is the ambient air temperature reading available in the Midea Cloud? What other variables are available in the cloud t...
Have you considered putting the hot water cylinder in the loft if you have one?
If you are using a system for control purposes, I would suggest not carrying out any form of upgrading unless it is absolutely necessary. Industrial c...
The upper temperature gauge (near the red flow regulators) is now reading 29C, and the lower one (near the grey solenoid valves) is reading 23C. This ...
Please clarify, how to do what?
@sarah What is the 'Hot Room' and how is it getting hot?
@leftbacks Did you check the freeze stat setting as I suggested?
I would suggest that you investigate why you are using 15kWh to 20kWh electricity usage, most homes I believe are below 10kWh.
Looking at the photo's of the UFH manifold, they appear to show a water supply temperature of possibly 19C, and a return temperature of 15C. I therefo...
Was the floor adequately insulated underneath the UFH pipes?
You should have been provided with all the relevant documentation in the handover package when construction was completed. To be able to help you re...
I have just had a look back through your previous messages to see if I missed anything. One thing that I would suggest is that you get all the uninsul...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Adding additional Solar Panels to a DC coupled battery system
Let's deal with mounting systems first. You don't hav...
By Transparent , 5 hours ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
@kilgorexv definitely a larger inverter will help and m...
By AndrewJ , 23 hours ago
-
RE: Adventures in heat loss calculations
@rob-of-york — thanks for posting this, all very useful...
By cathodeRay , 1 day ago
-
RE: Surface mount or bury primaries for heat pump installation?
The installation is almost done! I've written up two ...
By tomasmcguinness , 2 days ago
-
RE: Glass lined Cylinder for private water supply
This has turned into a fascinating little rabbit hole. ...
By Mars , 2 days ago
-
RE: Switch suitable to change between two inverter CT's
Last winter my battery ,32KWh, could run the house com...
By Jancold , 2 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
Agree with Major. And even if I was very happy with ...
By Batpred , 2 days ago
-
RE: Is the "divide by 2900" rule still valid?
There is another estimator that you could use, a formul...
By Rob of York , 2 days ago
-
RE: To re-pipe or not to re-pipe? Moving from oil boiler to air source heat pump.
@penval, really useful update. After all the discussion...
By Mars , 4 days ago
-
RE: Who's your electricity provider and what's your tariff?
@papahuhu I prefer to look at it simplistically. We d...
By Old_Scientist , 5 days ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 5 days ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 5 days ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 6 days ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 6 days ago
SPONSORS
