Joining the Renewable Heating Hub forums is completely free and only takes a minute. By registering you’ll be able to ask questions, join discussions, follow topics you’re interested in, bookmark useful threads and receive notifications when someone replies. Non-registered members also do not have access to our AI features. When choosing your username, please note that it cannot be changed later, so we recommend avoiding brand or product names. Before registering, please take a moment to read the Forum Rules & Terms of Use so we can keep the community helpful, respectful and informative for everyone. Thanks for joining!
Last seen: Jul 30, 2026
@old_scientist no easy solution for this I think, with these battery banks being built to store wind energy I’m thinking as yourself that the FIT migh...
@ashp-bobba cost me around 400 quid to get a bloke out to do a full diagnostics on mine so I could rebuild it properly, he doesn’t do servicing or rep...
@toodles mine went and it was cheaper to get another, i priced the part, common on a Samsung and it was stupid money and a cow to change.
@editor when my heat pump was checked for excess ice the engineer said low gas can cause it but in my case it wasn’t and was attributed to a really ...
@editor yup, be interested to know what it cost SP. Said he was scheduled to do 14 a day so including travelling ?
Just had my heat pump annual service completed today. I qualify for three years free servicing by Scottish power who sub contract it out. I won’t men...
Live AC or live DC? not that either should happen! [/quote]its mark the sparky on utube and it was 122v ac
[/quote] genuine the frame was live, meter on it
Heating engineers out today and my fault is the expansion vessel for the dhw cylinder. It started making this noise like a foghorn on Saturday and ha...
@toodles the installer coming out tomorrow toodles. I was curious if the tundish routinely blew off or if it’s a fault but looks like a fault or they ...
SPONSORS
Degrees of Separation
Latest Posts
-
RE: Who's your electricity provider and what's your tariff?
I've not given it much/any thought. I did look at the p...
By Old_Scientist , 21 minutes ago
-
RE: How Accurate Is My DIY Heat Loss Calculation?
D'oh - of course. I shouldn't post before my brain is f...
By Old_Scientist , 5 hours ago
-
RE: Questions about A2A for heating as well as cooling
@rob-of-york I would concur with the underfloor insulat...
By Toodles , 7 hours ago
-
RE: New Vaillant Arotherm controls link to existing thermostats ; wired vs wireless
Nothing attached! I have rads but UFH makes the case ...
By JamesPa , 7 hours ago
-
RE: Cooling with air to water heat pumps
Passive cooling should always be the first call. Keep ...
By JamesPa , 8 hours ago
-
RE: Do I add Air Con or MVHR to existing A2W ASHP?
@rob-of-york Thank you, I’m thinking along these same l...
By Toodles , 1 day ago
-
@Mars Good questions! The downstairs unit did the maj...
By Rob of York , 1 day ago
-
RE: Volumisers in Heat Pump Systems: Does Placement Matter?
@dave, I think @jamespa has probably identified the mos...
By Mars , 2 days ago
-
RE: Plug and play solar. Thoughts?
My thought is simple. Bring it on and bring on plug in...
By JamesPa , 2 days ago
-
RE: Heat Geek mini store vs pump size
Yes I agree, that’s why Heat Geek have most likely sele...
By Tomtheheatingengineer , 3 days ago
-
@tomtheheatingengineer, thank you, and welcome to the f...
By Mars , 3 days ago
-
RE: HeatGeek vs Octopus surveys: puzzling disparity - any ideas why?
@majordennisbloodnok @tomtheheatingengineer For my ...
By JamesPa , 3 days ago
-
RE: Is the "divide by 2900" rule still valid?
Really flow rate is a pipework limitation not a water p...
By JamesPa , 4 days ago
SPONSORS
